Electric Replace with LEDR4SCP/930CA type LED light. To order contact FAT ELECTRIC COMPANY Tel: 562-463-2852 HTTP: www.feitcom Email: Version 2. 0 INSTALLATION & OPERATING INSTRUCTIONS READ & SAVE IMPORTANT SAFETY INSTRUCTIONS Please read and understand this entire manual before attempting to assemble, operate or install this product. 1.
Version 2. 0 PACKAGE CONTENTS Before beginning installation of this product, make sure all parts are present. Compare parts with package contents list and diagram as below. If any part is missing or damaged, do not attempt to assemble, install or operate this product.
Version 2. 0 1. Installation into Existing Recessed Incandescent Fixture: For use with 4in recessed housings (housing sold separately) LED recessed trim will fit into select existing 4in nominal incandescent housings. Step 1. Turn OFF power at switch and fuse box or circuit breaker. Step 2. Remove existing trim installed in recessed housing (if necessary). Step 3. Install adapter inch socket (see FIG. 2). Step. Connect the two terminal together (see FIG. 3). Step 5. Gently push trim into place (see FIG. 4).
Version 2. 0 ‘WARNING Risk of fire or electric shock. LED Recessed Downright with Trim installation requires knowledge of luminaries electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician. 'WARNING Risk of fire or electric shock. Install this product only in the luminaries that have the construction features and dimensions shown in the photographs and/or drawings.
