Installation Guide

Vｅｒｓｉｏｎ 2 ．０
Step 6.
Step 7.
Step 8.
Step 9.
Connect the orange connectors together (see FIG. 4B).
Insert torsion springs into fixture housing brackets (see FIG. 5).
When installing trim into a 5” recessed housing, the torsion spring must be moved. Unscrew the torsion
spring from the 6” position and move to the 5” position as shown.
Gently push up trim and torsion springs so they begin to expand and lift trim in place (see FIG. 6).
FIG. 4A
FIG. 4B
FIG. 5
FIG. 6
Terminals
Connect the orange connectors
For 6” Recessed
housings
For 5” Recessed
housings