Installation Guide

Vｅｒｓｉｏｎ 2 ．０

2. Installation into Existing Recessed LED Fixture with compatible orange connectors

LED recessed trim will retrofit into select existing nominal LED housings.

Step 1.

Step 2.

Step 3.

Step 4.

Step 5.

Step 6.

Turn OFF power at switch and fusebox or circuit breaker.

Remove existing trim installed in recessed housing (if necessary).

Discard medium base adapter

Connect the orange connectors together (see FIG. 2B).

Insert torsion springs into fixture brackets (see FIG. 2A).

Gently push up trim and torsion springs so they begin to expand and lift trim in place (see FIG. 3).

FIG. 1A

Connect the orange connectors

FIG. 2B

FIG. 3

FIG. 2A

Diagram of recessed xture

(

FIG. 1B