Installation Guide

Vｅｒｓｉｏｎ 2 ．０
PRODUCT ELECTRIC RATING
THE RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABLITITY
OF THE COMBINATION SHALL BE DETERMINED BY CSA OR AUTHORITIES HAVING JURISDICTION.
INPUT
VOLTAGE
/ FREQUENCY
INPUT
CURRENT
INPUT
POWER
120V/60Hz
170mA
20.5W
WARNING – Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaires
electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
WARNING – Risk of fire or electric shock. Install this kit only in the luminaires that have the construction
features and dimensions shown in the photographs and/or drawings.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
WARNING – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other
sharp objects.
MIN. LAMP COMPARTMENT DIMENSIONS 135mm (5⅛”in) DIA X 190mm (7½”in) HEIGHT When use in
5 inch recessed luminaire
MIN. LAMP COMPARTMENT DIMENSIONS 154mm (6”in) DIA X 188mm (7½”in) HEIGHT When use in 6
inch recessed luminaire