Installation Instructions

PRODUCT ELECTRIC RATING
THE RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY
OF THE COMBINATION SHALL BE DETERMINED BY UL OR AUTHORITIES HAVING JURISDICTION.
INPUT
VOLTAGE
/ FREQUENCY
INPUT
CURRENT
INPUT
POWER
120V/60Hz
XXXmA
10.5W
WARNING – Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaires
electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
WARNING – Risk of fire or electric shock. Install this kit only in the luminaires that have the construction
features and dimensions shown in the photographs and/or drawings.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
WARNING – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other
sharp objects.
WARNING – RISK OF FIRE OR ELECTRIC SHOCK. DO NOT ALTER, RELOCATE, OR REMOVE
WIRING, LAMPHOLDERS, POWER SUPPLY, OR ANY OTHER ELECTRICAL COMPONENT.
MIN. LAMP COMPARTMENT DIMENSIONS 135mm (5⅜ in) DIA X 190mm (7½ in) HEIGHT When use in
5 inch recessed luminaire
MIN. LAMP COMPARTMENT DIMENSIONS 154mm (6 in) DIA X 188mm (7½ in) HEIGHT When use in 6
inch recessed luminaire