QE Model: MOT/DOOR/WIF/BAT SMART DOOR & WINDOW SENSOR IMPORTANT SAFETY INSTRUCTIONS AND INSTALLATION GUIDE = Fiat Electric spp Only supports BH oars READ BEFORE INSTALLATION SAVE THESE INSTRUCTIONS Questions, problems, missing parch? Before returning % the ste, cal Fiat Electric Customer Service aam.pm, PT, Monday Friday 1-368-298BIAB (2852) FETCH ‘Wo leucine 1a ust and confine you hers pieced In Fat Eis trough th purchases of this Smut Dy & Window Sana.
P re-instailation TOOLS REQUIRED TO MOUNT SENSOR @ PHELPS PENAL POWER DRILL SCREWDRIVER HARDWARE INCLUDED 4.1. A NOTE: Harbors not shown in oki si. F Part | Description’ Quantity | Doorstepping Sensor 1 BD | Magnet 1 €C | Double-Sided Taps for the Sensor 1 DD | Doubles-Siied Tampa for the Magnet 1 EE | 15/AM Aline Battier 2 FE | Mounting Screws 4 Description Latch Button Reset Button =! ° Status Tamper Light Switch >» Tem DESCRIPTION.
Screw Installation 1 Remove Precipitate « Remove the back plate from tie Door/Window Sensor (AA) by pressing the Aniakchak button on top and gently pulling the backspin unl ft releases. = Remove the precipitate from the Magnet (BB) by grasping It from the middies and gently pulling the back plate until It releases.
Adhesive Installation 1 Remove Precipitate * Removal the precipitate from the Door/Window Sensor (AA) by passing the Ich bunion on tap and gently pulling the back plate unt t releases. « Remove the backpack from the Magnet (BB) by grasping It from the middies and gently pulling the back plate until It releases. 2 Install Back plates with Double-Sled Tape + Clean the mounting earn thorough (surface must bo free of dust, dirt or grease).
APP Setup Download and Install the Felt Electric app + Sow or FoR Ecc sp 1 Need Help? Aro Sta or Google Pay.
