LED Smart Bulb Control Your Lights Using Apple HomeKit™ LED Ampoule Intelligente Contrôlez votre lumière en utilisant Apple HomeKit™ User Guide Mode d’emploi
Smart Lighting Simplified Control Your Lights Using Apple HomeKit™ Éclairage intelligent simplifié Contrôlez vos lumières en utilisant Apple HomeKit ™
Pair Product to Apple® Home App ON 1 Turn ON the light. 2 Launch the Home App. 3 1234 5678 3 Tap on “Add Accessory”. 4 Scan the QR setup code (printed on the product and user manual) into the Home app.
How to Share Homekit™ Access 1 Launch the Home App. 2 Tap on the “Arrow” in the 2 top left hand corner. P1 P2 P3 People 1 People 2 People 3 3 Under people tap on “Invite”. Note: The user’s information must be linked to an iCloud® account in order to gain access. 3 4 Enter the appropriate user’s email address or phone number. 4 5 Tap on “Send Invite”.
Reset Product to Manufacturer Default Setting Keep the light ON for more than 6 seconds, then power cycle 4 times. 1 ON Power Cycle: Turn OFF the light and wait for 3 seconds. Turn ON the light and wait for less than 1.5 seconds. OFF 4 Times ON OFF 2 Flash 3 Times Turn ON the light, the light bulb will flash 3 times, wait for around 5 seconds, the light will flash again to indicate the success of the reset. Voice Assistance 1 Use Siri® to control the light.
Add Scene or Accessory 1 1 Tap on the “Room” icon and then tap “+”sign on the top right corner. 2 To create your favorite scene or add an accessory, tap on “Add Scene” or “Add Accessory.” 2 1 Scheduling and Away from Home Control 1 6 English 1 Tap on “Automation” in the Home app to manage scheduling and control when away from home. 2 Schedule and control your lights away from home via Apple TV (4th generation or later), tvOS 10 or later or an iPad with iOS 10 or later.
Firmware Update 1 Download the “FEIT OTA” from the App Store. 2 3 2 Tap on the “More” icon in the upper right corner. 3 Tap on the “Equipment upgrade”. 4 Select the light that needs 4 to be updated. 5 Tap on the “Update Right Now”. 5 Note: A notification message will pop up after the software update is completed successfully.
Associez le produit à l’application Apple® Home ON 1 Allumez la lumière. 2 Lancez l’application Home. 3 1234 5678 8 French 3 Appuyez sur “Ajoutez un accessoire”. 4 Scannez le code d’installation QR (imprimé sur le produit et manuel d’utilisation) dans l’application Accueil.
Comment partager Homekit ™ Access 1 Lancez l’application Home. 2 Appuyez sur la “Flèche”dans le coin supérieur gauche. 2 P1 P2 P3 People 1 People 2 People 3 3 Sous les gens, appuyez sur “Invitation”. Remarque: Les informations de l’utilisateur doivent être liées à un compte iCloud® pour pouvoir y accéder. 3 4 Entrez la bonne adresse e-mail de l’utilisateur ou numéro de téléphone. 4 5 5 Appuyez sur “Envoyez l’invitation”.
Réinitialiser le produit au paramètre par défaut du fabricant Gardez la lumière allumée pendant plus de 6 secondes, puis redémarrez 4 fois. 1 Allumer Cycle de puissance: Éteignez la lumière et attendez 3 secondes. Allumez la lumière et attendez moins de 1,5 seconde. Éteindre 4 Fois Allumer Éteindre Allumez la lumière, l’ampoule clignotera 3 fois, attendez environ 5 secondes, la lumière clignotera de nouveau pour indiquer le succès de la réinitialisation.
Ajouter une scène ou un accessoire 1 Appuyez sur l’icône “Chambre ” et puis appuyez sur le signe “+” en haut sur le coin droit. 2 Pour créer votre favorite scène ou ajouter un accessoire, appuyez sur “Ajoutez une scène” ou “Ajoutez un accessoire.” 1 2 1 Planification et absence du contrôle à la maison 1 1 Appuyez sur “Automation” dans l’application Home pour gérer planification et contrôle quand loin de la maison.
Mise à jour du firmware 1 Téléchargez le “FEIT OTA” de l’App Store. 2 3 2 Appuyez sur l’icône“Plus” dans le coin supérieur droit. 3 Appuyez sur le “Mise à jour de l’équipement”. 4 Sélectionnez la lumière qui a 4 besoin d’être mise à jour. 5 Appuyez sur le “Mettez à jour maintenant”. 5 12 French Remarque: un message de notification s’affichera une fois la mise à niveau du logiciel terminée avec succès.
Caution / Avertissement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
MPE Reminding/ Rappel MPE To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Les antennes installées doivent être situées de facon à ce que la population ne puisse y être exposée à une distance de moin de 20 cm.
HomeKit code can successfully pair your Feit Electric Light Bulb with the Home app on your Apple devices. Le code HomeKit peut réussir à associer votre ampoule électrique Feit à l’application Home sur vos appareils Apple. 1234 5678 For Technical Support Please contact Feit Electric at Pour le support technique Veuillez contacter Feit Electric à (562) 463-BULB (2852) info@feit.com or visit us at/ ou visitez-nous au feit.
Apple, the Apple logo, Apple Watch, iPad, iPhone, iPad Air, iPod Touch and Siri are trademarks of Apple Inc., registered in the U.S. and other countries. HomeKit is a trademark of Apple Inc. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
LED Smart Bulb Control Your Lights Using Apple HomeKit™ Feit Electric HomeKit Bulbs Firmware Update for iOS 13.
Feit Electric HomeKit Bulbs Firmware Update for iOS 13. Install and turn ON your HomeKit bulb. Complete the following before adding the bulb to the Apple Home App. Note: Set your mobile device Auto-Lock feature to "Never" in Settings> Display & Brightness menu. 1. 2. Open the App Store app. 3. 1. In the search field, type FEIT OTA. 2. Tap "GET" to install the FEIT OTA app. 3. Once installed, tap "OPEN" to launch the FEIT OTA app. Tap "OK" to allow. www.feit.
Feit Electric HomeKit Bulbs Firmware Update for iOS 13. 4. 5. In the “My Home” screen tap on “More” at the bottom right corner. 6. In the “More” screen tap on “Equipment upgrade GATT”. Tap "OK" to allow. www.feit.
Feit Electric HomeKit Bulbs Firmware Update for iOS 13. 7. 8. In the “Please select equipment upgrade” screen tap on the Feit Electric bulb you want to update. Note: You will need to update one bulb at a time. 9. Wait for the firmware version number to load. In the “Firmware Update” screen tap on “Update right now”. Note: Do not leave or close the app while firmware is updating. www.feit.
Feit Electric HomeKit Bulbs Firmware Update for iOS 13. 10. 11. Wait for the firmware update to complete. 12. Once the firmware update has completed, the accessory will restart. After the accessory has been restarted, tap on "Confirm" www.feit.
Feit Electric HomeKit Bulbs Firmware Update for iOS 13. 13. 14. For more information or help, please contact our Technical Support Team at (562) 463-2852 To confirm Firmware update was completed verify that current version states 10.103.10 in the circle. You can now move on to the steps in the Feit Electric HomeKit User Guide located in the box. Your Feit Electric HomeKit Bulb firmware is now updated. www.feit.
