ECLIPSE IC USE AND CARE GUIDE HIGH OUTPUT LED SOLAR SPOTLIGHT Questions, problems, missing parts? Before returning to store, visit for further assistance. @ We appreciate the trust and confidence you java placed In Felt Electric through the purchase of this High Output LED Solar Spotlight. We strive {o continually create quality products designed to enhance your homey. Visit us sonatina to see our full Lina of products avails his for your home improvement needs. Thank you for choosing Fe it Electric.
Table of Contents .. Safety Information Warranty Pr-Installatio Tools Required Hardware Included Pr-Charge Solar Spotlight Installation Solar Panel Ground Stake Installation . Solar Panel Installation on Roof or Fence Operation without Remote .. Operation with Re mots . Operation with Smart Bridge Battery Replacement Troubleshooting NNN RRR WON READ BEFORE INSTALLATION AND SAVE THESE INSTRUCTIONS FCC STATEMENT This device complies with part 15 of the FCC Rules.
TOOLS REQUIRED Phillips Rubber mallet Pencil Power drill Drill Bit screwdriver HARDWARE INCLUDED Part | Description Quantity AA | LED Solar Spotlight 1 BB Spotlight ground stake 1 cc Solar panel 1 DD Solar panel ground stake 1 EE Screws 2 FF Wall anchor cord 1 1 For best performance, charge the unit for two (2) days prior to use oo Remove the Insulating tab. o In order to properly charge, the unit must be muted OFF.
Peel off sticker from solar panel and remove insulating tab 0 Peel off the sticker from the solar panel. 0 Remove the insulating tab. 0 It is recommended that you charge the unit for two (2) days before use lo adequately charge the battery, following the Pr-Charge instructions. Installing the stake 0 Push the spotlight ground stake (BB) into the ground.
Installing the solar panel on a roof or fence o Place Solar panel {CC) on roof or fence. Mark the holes using a pencil. o Drill through the marking and insert the anchors (FF). 2 Attaching the solar panel O Insert provided screw (2) through the hale(s) on the solar panel {CC) baas. oO Using a Phillips screwdriver, tum screw clockwise. o Repeat with other screw on opposite side. This One sync spotlight works on its own or with the provided remote.
Operating with a One Sync remote allows for expanded control. Modify settings of individual One Sync units or multiple units in groups. The One Sync remote has a 100 control range and will command all paired units within 100ft of the remote. All One Sync units ara equipped with a signal repeater that will repeat any remote commands to all other units within 100R.
Replacing the battery oO Ta replace the rechargeable battery, remove the lid on the side of the spotlight (AA) by unscrewing the lid screws (2) using a Phillips head screwdriver. oO Replace with a new lithium-ion 18650 3450mAh 3.6V minimum 12.42Wh or greats. o Reattach the lid by securing the (2) screws using a Phillips head screwdriver. [gills] The unit will not turn on. POSSIBLE CAUSES The battery is not making contact.
OLE FAT | LET Questions, problems, missing parts? Before returning to store, visit for further assistance. @ FAT ELECTRIC COMPANY | PIC RIVERA, CA | www.fait.
