ECLIPSE IC USE AND CARE GUIDE LED SOLAR SPOTLIGHT Questions, problems, missing parts? Before returning to store, visit for further assistance. @ Wa appreciates ihe trust snd confidence you have placed in Felt Electric Hi rough the purchase of this LED Solar Spotlight. We strive io continually crate quality products designed lo enhance your homey. Visit us sonatina to see our fall Sine of products available for your home improvement needs. Thank you for choosing Fe it Electric.
Table of Contents Safety Information . Warranty P re-instaliation . Tools Required Hardware Included . Pr-Charge Solar Spotlight Installation . Operation without Remote Operation with Remote . . . Operation with Smart Bridge . . Battery Replacement . Troubleshooting item D Odd DDD NOOONARWWWNONN READ BEFORE INSTALLATION AND SAVE THESE INSTRUCTIONS FOC STATEMENT This device complies with part 15 of the FCC Rules.
TOOLS REQUIRED Phillips Rubber mallet screwdriver HARDWARE INCLUDED AA BB AA LED solar spotlight BB | Ground stake 1 For best performance, charge the unit for two 2) days prior to use o Remove the insulating tab. o In order to properly charge, the unit must ba tuned OFF. Use the On/0ff/Cycle button to cycle through all of the colors (Soft White, Bright White, Cool White, Daylight, Deluxe Daylight, Red, Blue, Green, Yellow, Orange, Purple, Teal, and Pink} and reach the OFF position.
Peel off sticker from solar panel and remove insulating tab 0 Peel off the sticker from the solar panel. o Removal the insulating tab. o lt is recommended that you charge the unit for two (2) days before use to adequately charge the battery, following the Pr-Charge instructions. Installing the stake O Push the ground stake (B} into the ground. Using rubber mallet, insert ground stake (BB) esp enough ito the ground to ensure fully assembled spotlight (AA) is stable and does not tip over.
For expanded control, this One Sync Spotlight is compatible with One Sync remote or WiFi Bridge (sold separately). 2 Selecting a Color o To cycle through the colors, push the Cycle button. 0 Colors are: Soft White, Bright White, Cool White, Daylight, Deluxe Daylight, Red, Blue, Green, Yellow, Orange, Purple, Teal, and Pink. 1 Turing on the Spotlight o The spa tight (44) will remember the color setting Turn the on the spotlight (A) by pressing the button located under the light.
3 Pairing the Spotlight from the remote To unpaid, first follow step 1 so that the unit is in pairing mods. Once the unit is in pairing mode, on the Oneness remits, press the pairing group button and hold the power button for 3 seconds. oO The light will flash to indicate successful pairing, and the unit will exit pairing mode. oO To unpaid unit from all groups at once, held down button on the One Sync unit for 10 seconds.
[gis] The unit will not tum on. POSSIBLE CAUSES The battery is not making contact. Luis eH Loosen the battery cover screws, pull out the battery cover and inspect the battery connection. After Inspection, reinsert the battery. The battery is not fully charged. Ensure the solar panel is positioned in a location that provides full and direct sunlight. If Installed In a shady area, the battery will take a longer time to charge, and may not fully charge, and reduce working hours.
OLE FAT | LET Questions, problems, missing parts? Before returning to store, visit for further assistance. @ FAT ELECTRIC COMPANY | PIC RIVERA, CA | www.fait.
