Owner's manual

GuiLin FeiYu Electronic Technology Co., Ltd
GuiLin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: [e-mail]
Page 7
FY-AHRS-1200B attitude configure command example:
$Config,9,1 (CRLF)
Open the FY-AHRS-1200B serial data output
$Config,4,16 (CRLF)
Configure the FY-AHRS-1200B magnetic field deviation angle of 16 degrees.
$Config,99,1(CRLF)
Write the configuration information to the FLASH.
Attention:If there is any change of the configuration parameters ,you must click "Write FLASH"
button ,or chose menu"configuration"->permanent preserve configuration parameters",to writhe the
configuration to FLASH and pemanent preserve ,or next time power up ,these configuration parameter
will be lost .
——END——
Note: We reserve the right to change this manual at any time! And the newest edition will
be shown on our website www.feiyudz.cn.
horizontally to
complete the
magnetic field
calibration
write the
configuration
information
in the FLASH
$Config
99
Is fixed at 1
Once configured,
send this
command to write
the configuration
information in the
FLASH
NULL
NULL
NULL