User Manual

www.feiyu-tech.com 22
Gimbal calibration step:
(1) put the gimbal on the horizontal table.
(2) Select "gimbal calibration" on the remote control (see P21 3.4.8). During the
calibration, the tilt will sag gently.
(3) After the calibration is successful, the gimbal will be gently raised to the
horizontal state.
4. Accessories
4.1 Brushless Follow Focus (AKF II)
① Fix the lens gear to the camera's focus ring position.
② Fasten the fixed bracket to the quick release plate of the gimbal with a
hexagonal screw, and insert the aluminum tube (if the lens holder is attached to
the gimbal, remove it).
③ Insert the follower into the aluminum tube, move the aluminum tube to adjust
the front and rear position so as to make the follower gear and the lens gear
engage, and lock the 󽗉xed thumb screw on the 󽗉xed bracket.
④ Connect the USB cable to the USB port as the picture shown, the installation
is completed.
For more instructions, please check AKF2 AK series brushless follow focus
manual.