User Manual

Modes / Functions
6 7
Connect to APP
（2） Adjust the vertical center of gravity by the upper and lower sliders
Best Balance
（2）b
（2）a
Lean forward
Lean backward
Lean to the right
Lean to the left
Tip: Loosen the screw to adjust, please don't take out the screws from the sliders.
Power on / off
Power On： Press and hold function button
until the green light is on.
Power Off： Press and hold function button
until the red light changes from quick flashing
to always on.
Attention: Make sure the
camera is secure before
powering on the Gimbal.
!
In case of low battery, the red LED indicator
flashes for three times for every 5 seconds.
Please charge G360 or replace the battery.
Start the app on your smartphone,follow the instructions
to connect the smartphone with gimbal via Bluetooth.
Working Modes
Other Functions
Stand-by
Motor stops working.
The orientation of the camera is fixed.
Lock Mode
Panning Mode
Tilting and rolling direction are fixed, and the camera
lens moves according to the hand movement of the user.
* The gimbal will work in panning mode after powering on.
Reset
Reset to initial status.
G360
Gimbals Update Settings
Panning Pan&Tilt Lock
Standby Reverse Reset
360°
Choose a device
FY_G360_XX
D7:58:42:2D:DD：xx
Searching...
Rssi=xx
cancel