User Manual

7
Tilting
Tilting
Panning
Panning
Exit operations:
1.Click the function button to exit the autorotation mode during automatic rotation and reset the gimbal.
2.Enter the autorotation mode or autorotation setting, four times click the function button to exit the autorotation mode and reset the gimbal.
gimbal speed setting reference table
Annexed parameter tableļ¼š
Autorotation Mode
Note: Both the panning and tilting directions can be rotated.
1.Four taps on function button, gimbal will access the autorotation mode .
2. Set the gimbal rotetion start position: Pull the tilting axis or panning axis to the start position by hand,clicking the function button to record.
3. Set the gimbal rotetion end position:Pull the gimbal (which can be rotated more than one turn) to the rotation path you want to set, and
then click the function button to record the end position .
4.The gimbal will go to the start position and start the automatic rotation.
Using the gimbal autorotation function with a camera, timelapse photography functioning can be used to achieve special movement timelapse
photograpy.use the Feiyu ON App for control the speed setting .
1.Four taps on function button,
gimbal will access the autorotation
mode setting.
2. Turn the panning axis or
tilting axis to the start position
and hold for half a second.Click
on function button to record
the start position .
3 .Turn the panning axis or tilting axis
to the end position and hold for half
a second.Click on the function button
to record the end position .
4.Gimbal will recover to
start position automatically.
Tilting axis and panning
axis turn to end position
at constant speed.The
gimbal is automatically
reset after the end.