User Manual

Function Button
Double tap
Single tap
Function Explanation
Panning Mode / Lock Mode
Panning and Tilting Mode
Single tap to switch between panning mode and lock mode
Under panning and tilting mode, single tap to switch to lock mode
Make the lens precision rotation 180 °Triple tap Rotation 180°in horizontal
Reset the tilting axis of the gimbal to initial orientation and initial modeQuadruple tap Reset
Long press until
the red light
flashes quickly
Single tap again to awake the gimbal, or triple tap to initialize the gimbal
Standby
Mode / Function Operation Instructions
ON: Long press Function Button and release it until the green light is on.
OFF：Long press Function Botton and release it until the red light changes
from quick flashing to constant.
You can using the function button to switch the working mode, power
on or power off the gimbal.
Please refer to “Modes / Functions”.
Function Button
DISCLAIMER
Attention
Please correctly assemble the gimbal in
accordance with the diagram.
Please install the smartphone before
powering on the gimbal.
When the gimbal is not in use or placed on
the table, please ensure it is powered off.
Prohibit any user for any illegal purpose. Users will be responsible for
all behaviors of purchase and use products.
The Company assumes no liability for any risks related to or resulting
from the debug and use of this product (including the direct, indirect or
third-party losses).
For any unknown sources of using, we will not be at any services.
The updating and changes of product firmware and program may
cause changes in function descriptions in this user manual, please
read the instructions carefully before upgrading the firmware and use
the corresponding user manual.
You can get the latest user manual from the official website:
www.feiyu-tech.com
Feiyu Tech reserves the right to amend this manual and the terms
and conditions of use the product at any time.
www.feiyu-tech.com
Create More Possibilities
For more information, please visit our official website
www.feiyu-tech.com
Support Email: [e-mail]
GuiLin FeiYu Technology Incorporated Company
Firmware upgrade
(1) Please visit the official website www.feiyu-tech.com to
download the relevant programs for upgrading, including
USB drive program, firmware upgrade software and product firmware,
and install the relevant software, decompress the firmware files for standby application.
Connect the USB cable with micro port as the above picture.
Please upgrade the relevant firmware according to the operation instructions of
firmware upgrade software.
(2)
(3)
Charging
After power off, connect the USB data cable to USB port, and connect with 5V
USB power adapter by USB cable (equipped by user).
The red indicator light is on during charging, and the green light is on after the
battery is fully charged.
Or take out the battery, and use the corresponding
charger to charge the batteiry (equipped by user).
Weight 355g（not including battery and smartphone）
Panning Increments 3°/s ~ 150°/s
User manual 1
Adaption
iPhone 6s Plus / 6s / 6 Plus / 6 / SE / 5c / 5s / 5 or
other smartphones with the similar dimensions
Usage time 8 Hours
Warranty card 1
Titling Increments 2°/s ~ 75°/s
1mm counter weight 1
Panning Angle
Heavy counter weight 1
Titling Angle
Rolling Angle
320°
Product model Quantity
320°
360°
Light counter weight 1
USB cable 1
Batteries (Type:22650) 1
SPG Live 1
6. Parameters
Package List
4. USB Port
装入电池
Indicator
Joystick
Bluetooth
shutter
Rolling
Tilting
Panning
360°
Function
button
(ON / OFF)
USB port
Panning axis
Tilting axis
Rolling axis
1/4 inch
screw hole
Handle
1/4 inch
screw hole
1 2
USB Port
micro Port
USB Cable
Upgrade........
PC
If the smartphone inclines to the left, please adjust it to the
right to the optimal balance status.
If the smartphone inclines to the right, please adjust it to
the left to the optimal balance status.
If there is no tolerance between smartphone and tilting axis,
but the smartphone still inclines to the left, please replace
the heavy counter weight or add the 1mm counter weight.
If there is no tolerance between smartphone and tilting axis,
but the smartphone still inclines to the right, please replace
the light counter weight or remove the 1mm counter weight.
+ +
Heavy
Counter
Weight
1mm
Counter
Weight
How to balance adjustment
No tolerance
Convenient for users to use cellphones
vertically for photographing
Cellphone Portrait Photographing
Publish in AUG 2016
Instruction Manual
3-Axis Stabilized Handheld Gimbal
for Smartphone
1. Product Overview
* The showing smartphone is only
for reference
5. Gimbal Horizontal Angle Adjustment
Adjusting steps:
When the initialization failed, the LED indicator will flash quickly, repeat step (2) to reinitialize.
(Initialize the gimbal)
The horizontal angle needs to be adjusted whenever the following situations happen to the gimbal
（1）
（2）
（1）The tilt angle is not leveled with the horizontal surface.
（2）The roll angle is not parallel to the horizontal surface.
（3）Under lock mode, the panning angle drifts.
In boot-up state, long press the Function Botton until the red light flashes quickly to enter standby status, the
blue light will flash 3 times periodically.
Lay the gimbal on a static flat surface and triple tap the Function Botton. Initialization is successful when the blue
light changes from constant on to flashing 3 times periodically.
Indicator Status
Mode / Status
Blue light flashes once
Blue light flashes twice
Panning mode
Panning and
Tilting mode
Lock mode / InitializingBlue light constant on
Blue light keeps flashing
Initialization failure /
Malfunction
Blue light flashes for three times Standby
Low batteryRed light flashes three times
Red light keeps flashing
Entering standby /
Entering power off
Joystick Camera lens
Up
Down
Left
Right
Down
Up
Left
Right
Joystick
After connecting with bluetooth , the button can be used as shutter function and the gimbal indicator will
blinks a green light every 10 seconds.
Tips: (1) Make sure the volume "+" key of your smartphone can control the shooting.
(2) Android devices: Android 4.3 and above，the hardware of smartphone support bluetooth 4.0 / BLE protocol
Bluetooth name: FY_SPG_ Live
Connecting steps:
(1)Turn on the bluetooth of your smartphone. (2) Connect your smartphone with “FY_SPG_ Live”.
(3) It can act as a mobile phone camera shutter after a successful connection.
Bluetooth pairing information clear: In boot-up state, long press the Bluetooth Shutter of the gimbal
until the red light is on to clear all the bluetooth pairing info. After clearing, smartphone paired previously
need to clear“FY_SPG_ Live” first, then shutdown the Bluetooth of smartphone and reopen it to pair anew.
When you change your smartphone, please first shutdown Bluetooth of the previous one, then start Bluetooth
pairing for the new one. 10 pieces of pairing info can be stored in this product.
Bluetooth Shutter
2. User Guide
!
(1) Please install the smartphone before powering on the gimbal
(2) Please turn off the power when the gimbal is not in use, then remove the smartphone
1
2
Attach the smartphone by the quick-release adapter, and
ensure it is secure.
Install the smartphone
Install the battery
Tips: Please take off the protective casing of the
smartphone before installation.
Remove the handle and insert one 22650 battery into it.
Attention !
3
Best balance
Balance Adjustment
In order to achieve in a better performance of
the gimbal, please try to adjust the smartphone
installation to the best balance.
4
Power on / off
Power on： Long press Function Button and
release it until the green light is on.
Power off：Long press Function Botton and
release it until the red light changes from quick
flashing to constant.
Attention: Turn the gimbal on after ensuring
the smartphone is secure.
If the battery power is too low, the red light will
flash 3 times every 5 seconds. Please shut
down the gimbal in time, and recharge or
replace the battery.
!
3. Modes / Functions
The phone stays in its current orientation.
The panning, tilting and rolling direction are
all fixed.
Working Modes
Panning Mode
The phone can move to left or right smoothly
along with the handheld moving. The tilting
and rolling directions fixed.
Panning and Tilting Mode
The phone can move to left or right and tilt up
and down smoothly along with the handheld
moving. The rolling directions fixed.
Lock Mode
As shown, roll the gimbal slowly to the
right (or left) 90°, the rolling axis
automatically follow to the right (or left)
is rotated by 90°.
Reset the tilting axis of the gimbal to initial orientation and initial mode.
Reset
In standby mode, keep the gimbal in power-up state, the motor
stops working, the indicator light flashes for three times, and single
tap again the function botton to wake up the gimbal.
Standby
Other Functions
* Boot default mode: Panning mode
5V USB power adapter
(Equipped by user )