User Manual
Table Of Contents
4
3.3 Charging
Connect the USB cable to charge. The indicator light is red when charging, and green when fully charged.
Charging Charge complete
3.4 Smartphone installation
*It is recommended to remove the smartphone case before installation
Pull the smartphone holder and put your smartphone in, keep the holder in the center of the smartphone. If the
phone tilts to left or right, please hold the roll arm ,slightly move the smarpthone to oppsite side until paralleling
to the ground.
3.5 Power on / o
*Unlock the three-axis clamp before powering on the gimbal.
*Power on the gimbal only after installed your smartphone securely.
Power on / o：Long press the power button and release it when you hear the tone.