User's Manual

5 6
2.5 Always switch off the tamper and remove the plug from
the outlet before maintenance or cleaning ,or if any
problems occur ,to avoid electric shock or injury
2.12 Do not make any modification or alteration to the oval
tamper ,the manufacturer is not responsible for damage
caused by failure to observe these instruction
The tamper you received is in operation condition ,you only
need to adjust portafilter and lower stand with allen key and
switch on the tamper
3.1 Adjusting the porafilter and stand
Make sure the diameter of your portafilter matches that of your
oval tamp’s coffee tamp ,It is essential that the portafilters is
perfectly adjusted to achieve a consistent and level tamping
3.2 Loosen the bolts of the lower stand counterclockwise with
allen key Fig-1
3.3 Turn the adjustment wheel counter clockwise to pull down
the lower stand Fig-2
3.4 Insert the
portafilter between the upper and lower stand, adjust the
clamp to the best height position, make the portafilter as close
to the upper stand ,and check whether the portafilter slides in
easily, if the portafilter is easy to slide ,it need to adjust the
height again Fig-2
3.5 After adjusting well the position ,remove the portafilter ,
fasten the bolts using allen key Fig-4
3 Installation
2 Safety
Read the safety and use instructions carefully before install
or use the tamper ,only use the tamper as described in this
document and save for future reference
2.1 Oval tamper should only be used for the function which
is was designed to tamp grounded coffee ,do not use the
tamper to press any other types of food
2.2 The tamper can only used by people aged from 18 years
and above,by people with reduced physical,sensory or mental
capacities or lack of experience and knowledge if they have
received supervision or instructions on the safe use of the
tamper and understand the associated risks
2.3 Children should not pay with the tamper ,it may result the
tamper getting damaged ,cleaning and maintenance of the
tamper should not be carried out by children without
supervision
2.4 Do not allowing immerse cables ,plugs or internal or
external surfaces of tamper into water or other liquids to
avoid electric shock or injury
2.6 Always adjust the lower stand and portafilter ,and
check whether the stand is fasten before use
2.7 Operate the tamper on a level and vibration-free surface ,
avoid drop and bumping ,it could cause tamper damaged
2.8 Never insert your hand or any part of the body between
the coffee base and lower stand ,It will be dangerous
2.9 Operate the tamper on a dry condition ,do not near water
or clean tamper with water jet ,do not use wet cloth to clean
the tamper base ,grounded coffee could stick to the tamper
base
2.10 If any component of oval tamper is damaged ,we
recommend contacting authorized services personnel to
carry out the repair or replacement ,guaranteeing the
safety standards
2.11 It is not recommended that you use non-original
accessories ,which may cause fire ,electric shock and
personal injury