User's Manual

7 8

4 Operation

Fig-1 Fig-2

Fig-3 Fig-4

4.1 Use

4.2.3 Pressing mode button ,symbol I will blinks ,you could

choose tamping times , or by rotary button ,then set

up the force as you required ,Force adjustment could be

steps of 1kg in the range from 2KG-40KG

4.2.1 Turn on the switch

4.2 Tamping force and time regulation

4.1.6 You can remove the portaﬁlter after the symbol ( )

disappear Fig-5

4.1.5 Wait until oval tamper has pressed the coffee

4.1.3 Insert the portaﬁlter between the upper and lower

stand until it reaches the bottom

4.1.2 Level the grounded coffee in the portafilter

4.1.1 Turn on the switch

4.1.4 The tamper automatically starts tamping the

coffee while the sensor detects the metal poratafilter

The message ( ) appear on the screen Fig-5

4.2.2 The screen will display symbol , , andU1 ,U2 ,U3 ,

symbol , , means tamping times ,U1 ,U2 ,U3 means user

data,every user date can be set 1- 3 tamping times ,data

could be set by rotary button Fig-5

4.2.4 Time symbol will appear after you set up the force,then

you can set up the pressing time for every force by rotary

switch,tamping time could be adjusted from 0.1-1 sec.

4.2.5 For example ,you set 3 tamping times at user date U1,

first tamping force is 5KG ,second tamping force is

20KG ,third tamping force is 30 KG ,time is 0.2 sec ,

time is 0.5 sec ,time is 1 sec Fig-6