Datasheet

Description: 12G-H05VVF3G100-G46+0492/3,00M GR7001
Rating of cord set: 10A, 250Vac
1. PLUG: Type 12G
Molded plug according to : SEV 1011:2009, chapter SEV 6534/2
Rated current and voltage : 10A, 250 V AC
Plugbase : thermoplastic Polyester(PBTP) GFR
Pins : brass, part-insulated, nickel-plated, crimped
Pins outer diameter : 4,0 mm
Outer mold : PVC compound, hardness Shore A75-77
Approvals : SEV
2. CORD: Type H05VVF3G1,00mm²
Flexible cord according to : ÖVE K41a;HD 21.5 S3:1994+A1:1999+A2:2001
Marked : *JF*<ÖVE><HAR>H05VVF3G1,0mm2*N1095*CE*CCC 60227
IEC 53(RVV) 300/500V 3X1,0*KTL SW01001-2001A
Number of cores : 3
Conductor construction : 31x0,20 mm O.D. 1,25mm
Conductor insulation : Extruded PVC O.D. 2,40mm
Jacket : Extruded PVC O.D. 6,80mm +/- 0,20mm
Temperature rating : -20°C up to +70°C
Resistance of conductors : max. 19,5 /km
Dielectric strength : 2kVac, 1min.
Insulation resistance : >0,010M/km
Color of conductors : yellow/green,brown,blue
Approvals : HARMONIZED,ÖVE
3. 2
nd
end preparation: g46+0492
46mm jacket removed with end terminals LEAR 25787.123.009 MS BLK DIN 46228 D
Environmental conformity : EU-Directive 2002/96/EC (WEEE)
EU-Directive 2011/65/EU
EU-Directive 1907/2006 EG (REACH -compliant)
TESTING
Electrical testing : 100%
Visual inspection : 100%
High pot test wire to wire : 3kVac for 2 sec.
Continuity test : 25Aac to grounding / 20Aac to line and neutral
Polarity test : yes
Skin high pot test : 6kVac line to skin
Tolerances not indicated in the drawing: +/- 2 %
design subject to change without prior notice
DATE of ISSUE: Oktober, 2014
REV: 1 1 ORIG: lg