® Powershred ® Console Shredders 220/220CC 280/280CC 320/320CC 380/380CC Operating Instructions A Mode d’emploi B Instrucciones de funcionamiento C Bedienungsanleitung D Bedieningsinstructies E Istruzioni sul funzionamento F
English Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Parts Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 Installation, Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Checklist for Inoperative Machine . . . . . . . . . . . . . . . . . . . . . . . .
Important Safety Instructions 1. Read all instructions before use. 2. Save these instructions for later use. 3. Follow all warnings and instructions marked on the product. 4. Unplug this product from the wall outlet before cleaning. Clean with a damp cloth using a mild soap and water solution. (Do not use abrasives or petroleum based cleaners.) 5. Place this product as close as possible to power source for quick and easy unplugging.
Parts Identification 1) 2) 3) 4) A B C D E F 4 Indicator Lights Rocker Switch Cover Cabinet 5) 6) 7) 8) Cabinet Access Door Paper Feed Opening Power Supply Receptacle Circuit breaker (models 320-380 only)
Technical Specifications Model 220 220CC 280 280CC Cutting Style Strip Cross Cut Strip Cross Cut Shred Size Inches Millimeters 1/4 5.99 Sheet Capacity 8-1/2” x 11” 20 lb. A4/70gr Speed 115V, 60Hz Entry Width Inches Millimeters 5/32 3.9 5/32 x 1-1/4 3.9 x 32 1/4 5.99 5/32 3.9 5/32 x 1-1/4 3.9 x 32 14-16 12-14 16-18 14-16 8-10 9-11 14-16 16-18 12-14 14-16 8-10 9-11 22 FPM 22 FPM 22 FPM 22 FPM 10 (254) 10 (254) 15 (381) 15 (381) Motor Power 120V 220-240V 1/4 hp (0.
Technical Specifications Model 320 320CC 380 380CC Cutting Style Strip Cross Cut Strip Cross Cut Shred Size Inches Millimeters 1/4 5.99 Sheet Capacity 8-1/2” x 11”, 20 lb. A4/70gr Speed 115V, 60Hz A 5/32 x 1-1/4 3.9 x 32 1/4 5.99 5/32 3.9 5/32 x 1-1/4 3.9 x 32 18-20 16-18 20-22 18-20 10-12 12-14 18-20 20-22 16-18 18-20 10-12 12-14 22 FPM 22 FPM 22 FPM 22 FPM 10 (254) 10 (254) 15 (381) 15 (381) Motor Power 120V 220-240V 2/5 hp (0.28 kW) 2/5 hp (0.
Installation • Plug one end of the enclosed power cord (inside the waste box) into the power supply receptacle in the back of the shredder. • Screw casters into the nuts provided on the underside of the shredder. • Operate this product only from the type of power source indicated on the marking label. • Install the paper shredder so that the plug is easily accessible. • Operate shredder only in the upright position. • Set up paper shredder so that the ventilation slots are unobstructed.
Checklist for Inoperative Machines All Machines If no indicator lights are lit: • Make sure the plug is securely inserted in the receptacle on the back of the machine and into the wall outlet. • Make sure the shredder is on (switch in “I” position). If both the red and green lights are on: B Waste Box Full: • Press rocker switch to “O” to stop the cutting system. • Remove wastebox from inside cabinet and empty. • Return wastebox, close door and resume operation.
Maintenance (Cross Cut Units Only) Shredder Oiling Instructions When shredding capacity drops, noise increases, or if the cutting cylinders stop with a squeak or a rubbing sound, the cutters should be oiled. • When lubricating the cutters, utilize POWERSHRED lubricant #35250 or a suitable substitute, i.e., a light weight machine oil or a sewing machine oil. Do not spray an aerosol cleaner or lubricant into the machine. Some agents may combust, causing serious injury.
Declaration of Conformity Fellowes Manufacturing Company Doncaster Road, Kirk Sandall Doncaster, South Yorkshire, DN31H England declares that the product Models Powershred 220, 220CC, 280, 280CC, 320, 320CC, 380 and 380CC, conform with the requirements of the Low Voltage Directive (73/23 EEC) and the Electromagnetic Compatibility Directive (89/336 EEC) and the following harmonized European Normes (EN Standards) and IEC Standards.
A B C Contact For Service: United States Australia Canada United Kingdom Japan Benelux Italy Germany France 1-800-955-0959 (In Melbourne) (03) 9330-3211 (Outside Melbourne) 1-800-331-177 1-800-665-4339 01302-885 331 +81-3-5496-2401 +31-(0)347-377988 +39-071730041 +49-5131-49770 +33-(0)4-72-08-25-45 Benelux Vianen, The Netherlands Canada Markham, Ontario E F 1789 Norwood Avenue • Itasca, Illinois 60143-1095 630-893-1600 • Customer Service 1-800-955-0959 http://www.fellowes.
