POWERSHRED 225Ci/225i ® Please read these instructions before use. Do not discard: keep for future reference.
ENGLISH Models 225Ci/225i H. A. B. I. J. C. L. D. E. F. K. KEY A. SafeSense® Technology B. Paper/card entry C. CD entry D. Door E. Basket (paper) F. Basket (CD) G. Casters (4) H. Disconnect power switch 1. OFF 2. ON I. Sheet capacity indicator J. See safety instructions K. Shipping bolts (wing nuts) To be removed prior to operation L. Control Panel and LEDs 1. Reverse 2. ON/OFF 3. Forward 4. Auto 5. Door open (red) 6. Bin full (red) 7. Remove paper (red) 8.
BASIC SHREDDING OPERATION 3 2 1 5 4 6 C-2 25 C-2 25 or C-2 25 or AUTO AUTO Plug in and put disconnect Press ( ) ON to activate power switch in ON (I) position Feed paper/card straight into paper entry and release When finished shredding set to OFF ( ) Hold CD/card at edge, and feed into center of entry and release Do nothing and shredder will go automatically to sleep mode after 2 minutes of inactivity www.fellowes.
ENGLISH Models 225Ci/225i PRODUCT MAINTENANCE Cleaning Auto-Start Infrared Sensors Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causing the motor to run even if there is no paper present (Note: two paper detection sensors are located in the center of the paper entry).
POWERSHRED 225Ci/225i ® Questions or Concerns? www.fellowes.com Troubleshooting Registration Manuals Customer Service & Support Troubleshooting Replacement parts General questions Canada +1-800-665-4339 Mexico +1-800-234-1185 United States +1-800-955-0959 LIMITED PRODUCT WARRANTY Limited Warranty: Fellowes, Inc.