Office Thermal Binder Helios 30 TM E Please read these instructions before use. F Lire ces instructions avant utilisation. S Lea estas instrucciones antes de usar la máquina.
INDEX LAMINATOR CONTROLS / QUICK START GUIDE 3 ENGLISH 4-7 FRANCAIS 8-11 ESPAÑOL 12-15 2
BINDING MACHINE CONTROLS I O H/K A M C J L N G B E QUICK START GUIDE 3 1 2 3 4 5 6 7 8 9 10 11 12 F D
ENGLISH E CAPABILITIES Performance Entry width Binding capacity (max) Estimated heat-up time Cool down time Binding cycles Ready indication LED interface Heat-Shield Power Save / Auto shut-off Multiple Document Binding 12” 1.2” / 300 sheets (20lb) 4 minutes 30-60 minutes 1-10 cycles / 1-2 minutes Light & beeps Yes Yes Yes (30 mins) Yes Technical Data Voltage / Frequency / Current(Amps) 110-120V AC, 60Hz, 5.5A Wattage 600W Dimensions (HxWxD) 20.9” x 9.4” x 3.9” Net weight 5.
BINDING MACHINE CONTROLS A On/off switch (rear side) I Lid lock (2) B Power On button & LED J Binding channel C Binding thickness guide K Document support D Timer selection (increase) L Illuminated user interface E Timer selection (decrease) M Cooling vents F Select / OK button N Document clamp (binding) G Thickness setting / timer selection O Cooling rack H Lid FEATURES & TIPS ‘System-Check’ function When switched on, the machine performs a ‘System-Check’ function.
BEFORE BINDING 1. 2. Ensure the machine is on a stable surface. Check there is enough clear space around the machine to operate safely. 3. 4. Insert the power lead into the power socket (located at the rear of the machine). Plug the machine into an easily accessible main socket. Switch the main supply on. Open and lift the lid by releasing the safety catches on the front of the lid. HOW TO BIND 5. Switch the power on (located at the rear side). 6. The ‘Power-On’ button will be red.
TROUBLESHOOTING Problem Possible cause No ‘red’ power on LED Machine is not switched on No ‘green’ ready light after a long period Machine is in a hot or humid area Solution Switch on machine at rear next to plug inlet and at the wall socket Move the machine to a cooler and dry area Process the documents again, ensure Binding cover may be too thick to bind by tapping gently on a flat surface Loose and unglued sheets Timer setting may be incorrect The cover size is too small for the number of sheets
FCC CLASS B NOTICE - NOTIFICATION POUR LES ETATS-UNIS Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.