POWERSHRED M-7C ® Please read these instructions before use. Do not discard: keep for future reference.
ENGLISH Model M-7C E. A. B. F. KEY A. Shredder head B. Paper entry C. Window D. Bin E. See safety instructions C. D. F. Control switch 1. Auto-ON 1. OFF 2. Reverse CAPABILITIES Will shred: Paper, staples and credit cards Will not shred: CD/DVDs, adhesive labels, continuous form paper, transparencies, newspaper, cardboard, paper clips, laminates, file folders, X-rays or plastic other than noted above Paper shred size: Cross-Cut.............................................................
M-6C M-6C 6 6 BASIC SHREDDING OPERATION M-6C 6 PAPER/CARD M-6C 1 2 3 Feed paper/card straight into paper entry and release When finished shredding set to Off ( ) 6 Continuous operation: Up to 4 minutes maximum Set to Auto-On ( NOTE: Shredder runs briefly after each pass to clear entry. Continuous operation beyond 4 minutes will trigger a 30-minute cool down period.
POWERSHRED M-7C ® Declaration of Conformity Fellowes Manufacturing Company Yorkshire Way, West Moor Park, Doncaster, South Yorkshire, DN3 3FB, England declares that the product Model M-7C conforms with the requirements of the Restriction of Hazardous Substances Directive (2011/65/EU), the Low Voltage Directive (2006/95/EC), the Electromagnetic Compatibility Directive (2004/108/EC), the WEEE directive (2002/96/EC), and below harmonized European EN Standards: Safety: EN 60950-1 EMC Standard: EN55014-1 EN5
