Personal Shredder Owner's Manual

3
Product Profile
This product is built to shred paper and staples . It is n o t built to
take paper clips, continuous forms, adhesive labels, transparen-
cies, newspaper, cardboard or any plastic. Using it for these pur-
poses is likely to cause irreparable damage.
Confetti
Cut
OD500C
Sheet capacity* 5 sheets
Paper shred size 5/32" x 2" (3.9 x 50 mm)
Maximum paper width 9-1/2" (240 mm)
Recommended daily capacity 10-20 shredding passes
Maximum running time 5-7 minutes
Automatic cool-down period 15 minutes
Voltage 120 V / 60 Hz / 1.5 A
*Based on 20 lb., 8-1/2" x 11" (70gsm, A4) paper with shredder operating at rated voltage; heavier paper, high humidity, or
other than rated voltage may reduce sheet capacity.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
While setting up shre d d e r
•Check shredder for damage or defects; some paper particles in the basket are normal
due to product testing and does not indicate a defect.
•If the cord is damaged do not replace cord or use the machine. Return machine for a
replacement.
•Avoid touching exposed blades on underside of OD500C confetti-cut shredder head.
•Plug power cord in an outlet that can easily be reached.
•Do not place shredder near or over a heat or water source.
While operating shre d d e r
•Keep hands and hanging objects (jewelry, ties, loose clothing,
long hair, etc.) away from paper entry.
•Keep children and pets away from the shredder.
When not in use
•Always turn off and unplug shredder
•Unplug before emptying basket
•Do not open shredder head: Danger of electric shock.
N O T E : Do not use flammable synthetic oil, petroleum-based products
or aerosols of any kind on or near product at any time.