MSDS

Page 2 of 3
Fellowes, Inc.
www.fellowes.com
SECTION 6: ACCIDENTAL RELEASE MEASURES
Use absorbent material and dispose of appropriately. For large spills, keep product out of sewers and advise authorities if product has
entered sewers. Surfaces may become slippery after spillage.
SECTION 7: HANDLING AND STORAGE
Handling:
Keep away from heat and sources of ignition.
Storage:
Do not store near heat or flame. Store away from strong oxidizers.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Eyes and Face:
None necessary when product is used as intended.
Clothing:
No special protective clothing when used as intended.
Respiratory:
None necessary when product is used as intended.
Ventilation:
Normal ventilation is adequate.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point:
>500F (>260C)
Evaporation Rate:
0
Specific Gravity:
(water = 1): 0.86
Solubility in Water:
0 At 20C
Appearance/Odor:
Thin tan liquid; bland odor.
SECTION 10: STABILITY AND REACTIVITY
Stable:
Stable under normal conditions.
Conditions to Avoid:
Keep away from heat and open flame. Avoid strong oxidizing agents.
Chemical Incompatibility:
Strong oxidizers
Hazardous Decomposition:
None
Polymerization:
Will not occur
SECTION 11: TOXICOLOGICAL INFORMATION
Not listed on NTP, OSHA, or IARC.