Installation Guide

! PAGE

Step 1: Identify posts that require Fence

Armor protection, typically areas that are

aﬀected by grass trimmers.

INSTALLATION

INSTRUCTIONS

Step 2: If your post is already damaged, it

is best to waterproof, stain or paint the

eﬀected area before installing Fence Ar-

mor.

Step 3: Align Fence Armor so that it sits in

the middle of the centre line of your grass

trimmers path.

Step 4: If desired, use a hot dipped galva-

nized nail, 1 inch to 1 1/4 inch long. Ham-

mer into place.

Step 5: Preferred method, fasten with a

#8x1.5inch self-tapping stainless steel screw.

For Vinyl installation pre-drill a hole then fasten

with same screw with mild pressure so as not

to deform Armor.

Step 6: Fence Armor can also be fastened

from the sides, aligning hole to slot, if ac-

cessible. This is optional, in most cases

this is not necessary.

PAGE 1
INSTALLATION INSTRUCTIONS Step 1: Identify posts that require Fence Armor protection, typically areas that are aﬀected by grass trimmers. Step 2: If your post is already damaged, it is best to waterproof, stain or paint the eﬀected area before installing Fence Armor. Step 3: Align Fence Armor so that it sits in the middle of the centre line of your grass trimmers path. Step 4: If desired, use a hot dipped galvanized nail, 1 inch to 1 1/4 inch long. Hammer into place.
PAGE 2
INSTALLATION INSTRUCTIONS Step 7: If a larger vertical area of protection is required, Fence Armor can be stacked until desired height is attained. Step 8: If a low bottom rail prevents a Full piece of Step 10: Also useful for inside corner installation. Step 11: Cut Fence Armor down the centre to achieve a 90 degree corner. Again, do not forget to round the corners. Fence Armor, we recommend our Demi Fence Armor. Or you can use shears or cutter to trim Fence Armor to suit your size needs.