Instructions / Assembly

Fence4ever Fence Screen Instruction Guide:
Step 1: Unravel the screen and stretch the screen roll out.
Step 2: Have the zip ties or metal wire links (not included) ready to link up the metal grommets.
Step 3: Have a partner hold the far end corner of the screen and position it onto the fence frame.
Step 4: Have the other partner do the zip tie linking on to the frame work of the fence.
Step 5: Follow Step 3 and Step 4 throughout the frame work of the fence until all grommets are linked
up to the fence.
Step 6: Inspect all sections that the zip ties or wires are secure.
Step 7: If you need to connect another extension on to the fence; you can do so by lining up the side
grommets (left and right end) and zip tie or wire them together to link from one piece of screen to the
next length wise. If you want to custom fit the length of your screen; please follow the instruction
indicated below.
Custom Length Fit your Screen!
You can also custom fit your own length that is needed by:
Option 1: Wrap or fold the additional length of the screen around the other side of the fence.
Option 2: Cut the material with a scissor as the material will not fray once cut. Give it a couple inches of
the material at the end so you can secure that end by wrapping or curling the extra mesh material
around the end pole of the fence. You can secure the final end by using the zip tie and weave it through
the mesh material and do the lock and secure technique to the frame pole. Secure the end with zip ties
every 4-5 inches apart from each other to give it a nice secure re-enforcement. Important: Use an office
stapler and staple a couple of staples along the stitching on the black side belts (belt holding the
grommets) where it was cut to secure the stitching from coming loose.