User Manual
There are two ways to bypass eects. The rst is a general on-o feature that simply turns o all eects in all
presets with a single press of a button. The second lets users bypass specic individual eects within a preset.
To turn o all Mustang GT eects in every preset (and turn them back on), press the X FX utility button. There
is no option to save; this is merely a quick way to turn all eects o and back on. When the X FX utility but-
ton is pressed it will illuminate, and a blue “bypass” label will appear above each eect (see illustration below).
If specic individual eects have already been bypassed in a preset, use of the X FX utility button will not
turn them back on.
To bypass specic individual eects within a preset, highlight it in the SIGNAL PATH LAYER and press the
ENCODER. Select “BYPASS” from the menu of eects placement options and press the ENCODER again. The
SIGNAL PATH LAYER will then indicate that the eect has been bypassed; the box containing the preset num-
ber will change from blue to red (indicating that a preset edit has been made), and the SAVE utility button
will illuminate. With the eect now bypassed, further edits can then be made or the SAVE utility button can
be pressed to keep completed edits (see illustrations below).
ROCK & ROLL
TWIN
REVERB
REVERB
FUZZ
POST FX 1
LEVEL DECAY
DWELL DIFF TONE
To bypass a highlighted eect, rst press the ENCODER to access the menu of eects placement options.
BYPASSING AN EFFECT
11
ADD FX
BYPASS
DELETE
MOVE
REPLACE
Turn ENCODER to highlight “BYPASS” in eects placement options menu, then press the ENCODER to select it.
ROCK & ROLL
TWIN
REVERB
REVERB
FUZZ
BYPASS
SAVE
With the eect bypassed (as indicated here by white arrow below it and blue box containing the label “BYPASS”
above it), continue editing other parameters or press the illuminated SAVE utility button to keep completed edits.
TWIN
REVERB
REVERBFUZZ
ROCK & ROLL
BYPASSBYPASS
FX
The “X FX” utility button illuminates when pressed, bypassing all eects in all
presets (as indicated by blue “BYPASS” labels above each eect).