User Manual

In presets that include Modulation eects, Delay eects or both*, the TAP utility button ashes in time with

the default rate of the rst delay eect in the signal path (or rst modulation eect if no delay eect is present).

This rate can be left as is, or it can be modied using the TAP utility button. To set a new TAP tempo, tap the

ashing TAP utility button at the desired tempo at least two times (see illustration below). The TAP utility button

will function regardless of which layer is highlighted (PRESET LAYER, SIGNAL PATH LAYER or CONTROLS LAYER).

Various time parameters for all delay and modulation eects in the signal path can be adjusted in the CON-

TROLS LAYER without use of the TAP utility button. In the SIGNAL PATH LAYER, use the ENCODER to high-

light the delay or modulation eect to be modied; its controls will then appear in the CONTROLS LAYER.

Enter the CONTROLS LAYER by pressing its corresponding layer button, and scroll to the time parameter to

be changed using the ENCODER. Press and turn the ENCODER to select and adjust the desired time value,

during which the window containing the time value will turn red; press the ENCODER again to keep the new

time value (see illustration below).

* Mustang GT modulation and delay eects are listed on pages 22 and 23.

USING THE TAP TEMPO BUTTON

TWIN

REVERB

REVERBFUZZ

ROCK & ROLL

TAP

ROCK & ROLL

DELAY

LEVEL

DELUXE

REVERB

POST FX 2

DELAY TIME

60ms

To change the tempo of the rst delay eect (or modulation eect if no delay eect is present), tap

the TAP utility button at the desired tempo.

Delay and modulation eects tempos can also be changed by highlighting the time parameter’s numerical value in the

CONTROLS LAYER, then pressing and turning the ENCODER to set the desired tempo.