User Manual

The EXP-1 Expression Pedal is a dual-mode foot controller that enables the

user to control master volume (“Volume” mode) and various amp and eect

parameters (“Expression” mode).

Switch between Volume and Expression modes by stepping on the toe

switch (at the top of the pedal). Red and green LEDs indicate the mode in

use. Volume mode—indicated by the green LED—controls master volume

or can be turned o. Expression mode—indicated by the red LED—controls

many Mustang GT eect parameters such as wah eect frequencies, modu-

lation eect rates, etc.

To set up the EXP-1 for use, connect it to the footswitch jack on the back of the amplier, turn the amp on.

Press the MENU utility button on the amp and use the ENCODER to scroll to and select “EXP-1 SETUP” on the

menu shown (see illustration below).

A prompt will appear to select “PRESET SETTINGS” or “GLOBAL SETTINGS” (see illustration below); use the

ENCODER to select one. PRESET SETTINGS is used to assign the EXP-1 to a specic amp or eect within a

particular preset, in which a wide variety of parameters can be modied, depending on the amp or preset in

use. GLOBAL SETTINGS is used to congure parameters that will aect all presets. Both are described in more

detail below.

PRESET SETTINGS

As noted above, PRESET SETTINGS is used to assign the EXP-1 to a specic amp or eect within a particular

preset. To do this, press the ENCODER on PRESET SETTINGS, and the middle SIGNAL PATH LAYER will show—

one at a time—the amp and eects in that preset to which the EXP-1 can be assigned. The user can scroll

through these by turning the ENCODER (see illustration below).

EXP-1 EXPRESSION PEDAL

GLOBAL EQ

USER

EXP-1 SETUP

AMP SETTINGS

ABOUT THIS AMP

PRESET SETTINGS

GLOBAL SETTINGS

back

EXP-1 (PRESET)

VOL

VOL OFF GAIN

EXP PARAM HEEL TOE

’65

TWIN

back

In EXP-1 PRESET SETTINGS, the amp and eects in a preset to which the EXP-1 can be assigned are shown one by one in the SIGNAL

PATH LAYER; the ENCODER is used to scroll through them. In the example above, a ’65 Twin amp is highlighted.