User Manual

The CONTROLS LAYER of each preset displays information on whatever amp or eect is highlighted in the

SIGNAL PATH LAYER. Amp control knob settings are displayed by default (see illustration below); eects con-

trol settings are displayed when an eect is highlighted in the SIGNAL PATH LAYER. Amp and eects controls

are selected by turning the ENCODER.

Each preset can be used as is. With many dierent amp models, eects types and control settings to choose

among, however, each preset’s SIGNAL PATH LAYER and CONTROLS LAYER settings can easily be modied

and saved for personally individualized sounds (see next section, “Editing and Saving Presets”).

ROCK & ROLL

TWIN

REVERB

REVERBFUZZ

AMPLIFIER

Close-up detail of the CONTROLS LAYER, in which the gain control for

the amp model within the preset is selected.

EDITING AND SAVING PRESETS

Within each preset, the amplier control knob settings, amp models, and eects types and parameters can

be tailored to individual preference. When a preset is selected, the box containing its number is blue, indicat-

ing that no edits have been made to it (see illustration below).

When edits to a preset have been made, the box containing the preset number changes to red, and the SAVE

utility button illuminates (see illustration below).

TWIN

REVERB

REVERBFUZZ

ROCK & ROLL

TWIN

REVERB

REVERBFUZZ

ROCK & ROLL

SAVE