User guide

ManualsBrandsFender ManualsReceivers and AmplifiersAcoustasonic Junior DSP

wwwwww

ffeennddeerr..ccoomm

✧

wwwwww

..mmrrggeeaarrhheeaadd..nneett

INSTRUMENT

VOLUME TREBLE

MID

BASS

FEEDBACK

NOTCH

FX SELECT

STRING

DYNAMICS

FX LEVEL

MIC

LINE/INST.

VOLUME

TREBLE

POWER

FX SELECT

FX LEVEL

PHASE PHASE ON

BASS

HALL

ROOM

VIBRATONE

CHORUS

DELAY

REVERB

+DLY

PLATE

CHORUS

+DLY

REVERB

+CH

HALL

ROOM

VIBRATONE

CHORUS

PLATE

DELAY

REVERB

+CH

CHORUS

+DLY

REVERB

+DLY

Your new Acoustasonic™ Junior DSP amplifier delivers

world-class Fender

tone and world-standard Fender

quality:

• 40 Watts x 2 (80W total) output power

• 16 DSP stereo effects per channel

• Independent channels voiced specifically for acoustic

instruments and for vocals

•Exclusive String Dynamics™ control allows

attenuation of the high-frequency harshness

characteristic of acoustic instruments

• Feedback notch and phase reverse feedback controls

• Stereo effects loop jacks

• Balanced line-out jack

• Footswitch (optional) for remote on/off switching of

DSP effects

Thank you for choosing Fender

—

The W

orld’

s most popular instr

ument

amplifiers—since 1946

A. INSTRUMENT - Plug your acoustic guitar in here.

B. VOLUME - Adjusts the loudness of the Instrument

channel.

C. PHASE - Reverses the phase of the Instrument

channel which may reduce feedback in some

situations.

D. TREBLE/MID/BASS - Adjusts the tone of the

Instrument channel in the high-, middle-, and low-

frequency bands respectively.

E. FEEDBACK NOTCH - Rotate slowly to locate and

suppress feedback at a specific frequency on the

Instrument channel. Set to “1” when not needed.

F. STRING DYNAMICS™ - Controls a dynamic tone

shaping filter on the Instrument channel. Rotating

clockwise reduces the high-frequency harshness of

peak playing intensities or high volume settings while

maintaining crispness when playing more gently.

G. FX SELECT - Selects one of 16 DSP effects for the

Instrument channel (see DSP Effects on page 7).

H. FX LEVEL - Adjusts the level of the selected DSP

effect for the Instrument channel.

I. MIC - Balanced XLR input jack intended for a low-

impedance microphone.

J. LINE - Input jack intended for a high-impedance

microphone, drum machine or keyboards. Accepts

unbalanced (TS) or balanced (TRS)

inputs.

K. VOLUME - Adjusts the loudness of the Mic/Line

channel.

L. PHASE - Reverses the phase of the Mic/Line

channel which may reduce feedback in some

situations.

M. TREBLE/BASS - Adjusts the tone of the Mic/Line

channel in the high- and low-frequency bands

respectively.

N. FX SELECT - Selects one of 16 DSP effects for the

Mic/Line channel (see DSP Effects on page 7).

O. FX LEVEL - Adjusts the level of the selected DSP

effect for the Mic/Line channel.

P. P OW ER - Switches the amplifier on and off as

indicated by the power “ON” LED.

Q. IEC SOCKET (rear panel) -

Connect the supplied power

cord to a grounded AC

receptacle in compliance

with the voltage and frequency ratings specified on

the rear panel of your amplifier.

INPUT POWER

V Hz

270W

™™