ADVANCED OWNER'S MANUAL
B RO N C O ™ 4 0 Advanced Manual Introduction This manual is your step-by-step guide to all the advanced features found on your Bronco™ 40 amplifier. For information on using Fender® FUSE™, Ableton® Live or Amplitube®, please see the separate manuals for each product available at www. fender.
BRO N C O ™ 4 0 The LEDs are numbered 1, 2, 3 and correspond to three positions within each of the 4 selection ranges on each knob. Use the LEDs to determine exactly which position the knob is pointing to, for example, A1, A2 or A3 (A1 is shown below).
B RO N C O ™ 4 0 knob, including effect selections, is instantly recalled to your pre-programmed settings! Tuner Button Your Bronco™ 40 amplifier has a built-in Tuner mode that turns the control panel LEDs into a chromatic bass tuner. To use the tuner: 1. Press and hold the TAP button for 2 seconds. The TAP and EXIT buttons will illuminate. 2. Strike any single string on your bass and watch the panel LEDs.
BRO N C O ™ 4 0 Footswitch Factory Restore & Firmware Update Factory Restore Connect a (optional) 1-button footswitch (P/N 0994049000) into the FTSW jack to enable remote selection of your two favorite presets. The LED (next to the FTSW jack) will turn red or green to indicate which footswitch preset is active. To program the footswitch: 1. Select a preset that you want to assign to the footswitch. The preset must not be modified (the SAVE button must NOT be illuminated to proceed to step 2). 2.
部件部件名称 (Part Name) 部分电子元件 部分机器加工金属部件 部分其他附属部件 铅 (PB) x x x 有毒有害物质或元素 (Hazardous Substances’ Name) 汞 镉 六价铬 多溴联苯 (Hg) (Cd) (Cr6+) (PBB) o o o o o o o o o o o o 多溴二苯醚 (PBDE) o o o O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的现量要求以下 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的现量要求 This product is covered by one or more of the following patents: US Pat. 6,222,110 AMPLIFICADOR DE AUDIO IMPORTADO POR: Instrumentos Musicales Fender S.A. de C.V., Calle Huerta # 132, Col. Carlos Pacheco, C.P.