Reference and Owner’s Manual for the Deluxe 90
A Message from the Chairman Since 1946, Fender realized the importance of your amplifier. You see, your amplifier is more than just a combination of dials, wires and speakers. It is a finely tuned musical instrument. And like any fine musical instrument, it should be treated with special care and attention to detail. At Fender, we know what building guitar amplifiers is all about.
YOUR DELUXE 90 AMPLIFIER Congratulations on your purchase of a Fender Deluxe 90 Amplifier. Your new Fender amp is designed by the same Tone-Team that has created many other classic Fender amps like the Tone-Master®, Princeton® Chorus and the versatile Hot Rod Series. Built with care and special attention to detail, your Deluxe 90 offers much more than meets the eye.
DELUXE 90 FRONT CONTROL PANEL 1 2 MORE DRIV CH SELECT INPUTS A B VOLUME TREBLE MID BASS C D E F A. INPUT 1 - Plug your guitar in here. DRIVE G H VOLUME I J G. TWO COLOR DRIVE CHANNEL INDICATOR When the drive channel is in use, the LED is illuminated. Yellow indicates "Drive", while red indicates "More Drive". B. INPUT 2 - A lower impedance and sensitivity input than input 1, useful for guitars with active pickups. C. VOLUME - Adjusts the volume level of the normal (clean) channel. D.
VE TREBLE MID BASS REVERB FOOT SWITCH PRE OUT PWR IN L M N O P Q R K. MORE DRIVE - When this button is pressed in, drive channel gain is increased. FENDER MUSICAL INSTRUMENTS S Q. PRE OUT - This unbalanced jack provides an output signal from the preamp. It may be used to drive effects units in an effects loop, to drive additional amplifiers in a multi-amp set up, or as a preamp send to a mixing console. L.
DELUXE 90 REAR PANEL POWER ON A OFF B CAUTION: WARNING: CHASSIS SURFACE HOT TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE AVIS: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR ATTENTION: SUPERFICIE DE CHASSIS CHAUDE 360W A. POWER SWITCH - Turns the AC power ON and OFF. When the switch is OFF, your Deluxe 90 amplifier is completely shut down. B.
TROUBLESHOOTING COVERING CARE If the Deluxe 90 is set up but does not function, check the following items: • • • • • • • • Your Deluxe 90 is covered in genuine Tolex for long life and lasting good looks. To clean the Tolex covering, use a sponge and a light soapy water solution. Avoid spilling liquids on the operating surfaces, grill, volume and tone controls, switches and speakers. REMEMBER TO UNPLUG THE POWER CORD BEFORE CLEANING AND WAIT UNTIL THE UNIT IS COMPLETELY DRY BEFORE PLUGGING IT IN.
DELUXE 90 SPECIFICATIONS TYPE: PR 402 PART NUMBERS: 022-6702-020, (120V, 60Hz), USA 022-6762-020, (230V, 50Hz), Europe 022-6742-020, (230V, 50Hz), UK 022-6732-020, (240V, 50Hz), Aust. 022-6772-020, (100V, 50/60Hz), Japan POWER REQUIREMENTS: 360W POWER OUTPUT: 90W into 4Ω @ 5% THD INPUT IMPEDANCE: 850kΩ (Input 1), 66kΩ (Input 2) FUSE: 4A 125V for 100V /120V versions 1.