THE SOUND THAT CREATES LEGENDS KEYBOARD EXTENDED RANGE Two hundred , Owner s Manual P/N 048502
INTRODUCTION Your new Fender® KXR 200 keyboard amplifier is the result of Fender's® ongoing dialog with many of today's top musicians. The KXR 200 uses state of the art technology to deliver clear, resonant and most importantly...musical sound. The KXR 200 is also equipped with a master section which contains a master volume control, an effect return control, a reverb return control, an effects send jack, an effects return jack, and a line-out portion comprising of a 1/4 inch and XLR jacks.
A B INPUT VOLUME LOW MID HIGH 5 0 0 0 E D C F CHANNEL 1 0 10 -12 +12 -12 +12 CHANNEL -12 SEND INPUT EFFECTS REVERB 5 5 +12 0 10 0 10 VOLUME LOW MID 5 0 0 0 10 -12 +12 -12 +12 CHANNEL 3 INPUT VOLUME LOW MID HIGH 5 0 0 0 0 10 -12 +12 -12 +12 -12 SEND INPUT EFFECTS REVERB 5 5 +12 0 10 0 10 MIC VOLUME LOW 5 0 0 10 -12 +1 G KXR 200 FRONT PANEL FUNCTIONS external effects device.
I F J MID HIGH 0 0 0 +12 -12 +12 M MASTER CHANNEL 2 LOW -12 L K -12 +12 SEND EFFECTS REVERB 5 5 0 10 0 EFFECTS REVERB 5 5 5 10 0 ON RETURN VOLUME 10 0 10 0 10 ON OFF DELTACOMPTM CHANNEL 4 VOLUME LOW 5 0 LOW MID 0 10 -12 HIGH MID 0 +12 -12 0 +12 -12 EFFECTS REVERB 5 5 0 +12 -12 +12 POWER SEND HIGH 0 10 0 KEYBOARD EXTENDED RANGE 10 Two hundred N H vocal frequencies.
KXR 200 REAR PANEL P,Q. LINE OUTPUT JACKS - Signal from each of the channels are combined with reverb and effects to form the input to the power amplifier stage. The Line Outs are wired from this point. The 1/4 Jack (Item P) and the XLR jack (Item Q) provide easy connection paths from the KXR 200 to any external devices, such as a slave amp or a mixer. It is also useful for recording live performances.
Channel 1 Volume Effects Equalizer Reverb Channel 1 Balanced High Z Input Main KXR 200 BLOCK DIAGRAM Low Mid Hi Reverb Send Insert (Rear Panel) Channel 2 Balanced High Z Input Effects Send Effects Send Equalizer Effects Return Channel 2 Volume Effects Loop (Rear Panel) Low Mid Hi Reverb Send Insert (Rear Panel) Channel 3 Balanced High Z Input Effects Send Equalizer Channel 3 Volume Reverb Circuit Reverb Return TM Low Mid Deltacomp Hi Reverb Send Insert Master Volume (Rear Panel)
KXR 200 SPECIFICATIONS PART NUMBER : 100V Version : 120V Version : 230V Version : 240V Version : TYPE SPECIFICATION : PR 286 POWER REQUIREMENTS : 100V Version : 120V Version : 230V Version : 240V Version : 22-8572 22-8502 22-8562 22-8532 THIS EQUIPMENT CONFORMS TO THE FOLLOWING DIRECTIVES : EMC 89/336/EEC AND LV 73/23/EEC 100VAC, 50/60Hz, 540W 120VAC, 60Hz, 540W 230VAC, 50Hz, 540W 240VAC, 50Hz, 540W POWER AMPLIFIER SECTION : POWER OUTPUT : 200W R.M.S.
