Operation Manual

9
TYPE: PR 436
PART NUMBER: 022-6701-020 (120V, 60Hz)
022-6731-020 (240V, 50Hz) Aust
022-6741-020 (230V, 50Hz) UK
022-6761-020 (230V, 50Hz) Eur
022-6771-020 (100V, 50/60Hz)
POWER REQUIREMENT: 360W
POWER AMP POWER OUTPUT: 65W per channel, (130W Total) @ 5% THD
RATED LOAD IMPEDANCE: 8Ω per channel
SENSITIVITY: 1.4V RMS
PREAMP INPUT IMPEDANCE: INPUT 1: >1MΩ, INPUT 2: >130kΩ
NOMINAL LEVEL: INPUT 1: 100mV, INPUT 2: 200mV
MONO EFFECTS LOOP: NOMINAL LEVEL: -10dBv
SEND OUTPUT IMPEDANCE: 1kΩ (Balanced)
RETURN INPUT IMPEDANCE: 18kΩ (Balanced)
STEREO EFFECTS LOOP: NOMINAL LEVEL: -10dBv
SEND OUTPUT IMPEDANCE: 1kΩ
RETURN INPUT IMPEDANCE: 100kΩ
(Specifications for each channel:
Left on Tip, Right on Ring)
_____________________________________________________________________________
SPEAKER COMPLEMENT: TWO FENDER SPECIAL DESIGN
12”, 8Ω SPEAKERS (P/N 0025923000)
DIMENSIONS: HEIGHT: 18 1/2 in. (47 cm)
WIDTH: 26 1/8 in. (66 cm)
DEPTH: 10 1/4 in. (26 cm)
WEIGHT: 47 lb. (21.3 kg)
Product specifications are subject to change without notice
ULTIMATE CHORUS DSP - SPECIFICATIONS