Operation Manual

6 f e n d e r . c o m
















R
E
V
E
R
B
C
H
O
R
U
S
+
D
L
Y
+
D
L
Y
+
R
E
V
V
I
B
R
A
T
O
N
E
D
E
L
A
Y
T
R
E
M
O
L
O
INPUT
GAIN VOLUME VOICE TREBLE BASS F/X LEVEL F/X SELECT
V I N TA G E M O D I F I E D T U B E A M P L I F I E R
The Vibro-Champ® of the 1960s and ‘70s was an upgraded
version of the venerable Fender Champ® amp. Its small
size, low output, and great tube tone (including tremolo
effect) has been enjoyed by countless guitarists…beginners
and seasoned pros alike. The Vibro-Champ XD amplifier
takes that winning formula into a new era by combining
a real tube amp with versatile digital voicing and effects.
Recording and practice sessions come alive with the Fender
Vibro-Champ XD.
• 5 Watts into 4 ohms
• Digital Signal Processing
• 16 Effects “F/X” settings
• 16 Amplifier “VOICE” settings
• Line Output—for recording or sound reinforcement
Thank you for choosing Fender®
World's most popular instrument ampliers—since 1946.
A. INPUTPlug your guitar in here.
B. GAINControls preamp volume. Also controls signal
distortion, except when VOICE  {D} is selected.
C. VOLUME Use to set the loudness of the amplifier
after adjusting GAIN {B}.
D. VOICESelect one of  amplifier voicings (see next
page).
NOTE: Use the extreme flexibility of the Voice knob
wisely! Treble harshness or boomy bass tones can be
avoided by using the right guitar settings and playing
style for a particular amp voicing.
E. TREBLE/BASSAdjusts the high- and low-frequency
tone characteristics of the amplifier.
F. FX LEVELAdjusts the intensity of the active effect.
G. FX SELECTSelects the active effect (see next page).
H. POWER JEWELIndicates when the unit is on.
Rear Panel
I. POWER CORD SOCKETConnect to a grounded outlet
using the included power cord in accordance with the
voltage and frequency ratings specified on the rear
panel of your amplifier.
J. POWER SWITCHSwitches the amplifier ON–OFF.
K. FUSEProtects the unit in case of electrical faults.
Replace only with the type and rating specified on the
rear panel of your amplifier.
L. SPEAKER OUTConnection for the internal speaker or
an external speaker (/W minimum).
Use only a standard /" mono plug.
M. LINE OUTConnect your recording or sound
reinforcement equipment here.
Use only a standard /" mono plug.
Vibro-Champ XD Amplifier
Front Panel