Instructions / Assembly

Step 1:
Clean the door frame to remove any dust or
debris. Allow the doorframe to dry before
applying the hook & loop tape.
Step 3:
Apply the supplied hook & loop tape strips
to the existing hook & loop tape portions on
the top and sides. Be careful not to remove
the white backing.
Step 5:
Adhere the hook & loop tape portion of the
screen to the top of the doorframe. The
screen should be slightly higher in the top
center. This will ensure the screen’s magnetic
closure works properly. Once the top of the
screen is in place, slowly peel o the white
backing tape from the two sides. Press the
hook & loop tape to the frame moving from
top to bottom. Make sure the screen is loose
enough to ensure the magnets line up and
close easily.
Step 6:
Make sure the screen opens and closes
properly. Make adjustments if necessary.
Enjoy your new Magnetic Screen Door!
Step 4:
Peel o the white backing from the top
hook & loop tape strip.
Step 2:
Lay the screen at on the oor with the
hook & loop tape facing up.
Hanging Screen Door
Installation Instructions