User Manual

OPERATING INSTRUCTIONS
IMPORTANT
If your Storm Pro Siren has the label/logo pictured,
it is NOT COMPATIBLE with 4200 DataLink.
DO NOT CONNECT IT via RJ45 to the 4200 System.
DUAL SIREN DELAY
Dual Delay can be used when both speakers play the
same standard siren tone. When Dual Delay is activated,
the tones start playing out of sync to create the delay
eect. Dual Delay applies only for standard siren tones
with Dual Delay capability. Dual Delay does not aect
audio tones.
HORN-RING
Horn Ring can be used as a standard vehicle horn or used
to quickly switch between two standard siren tones. To
use Horn Ring as a vehicle horn, simply do not activate
any of the tone inputs.
To use Horn Ring for tone switching, activate an input
congured to a tone with Horn Ring capability.
Momentarily activate the Horn Ring to switch between the
congured tone and its alternate tone. Horn Ring does not
aect audio tones.
PARK-KILL
Park-Kill is used to deactivate any activated standard siren
tone. Park-Kill does not deactivate audio recordings. The
Park-Kill wire can be connected to your vehicle's overhead
light, door trigger, or park-signal so that the siren is
disabled when the door is opened or the vehicle is shifted
to park.
SIREN TONE OVERRIDE
When either Radio Rebroadcast or the Microphone is
activated, any activated tone, standard siren tone or audio
recording, gets deactivated.
RADIO REBROADCAST INPUTS
To allow for the ability to rebroadcast your emergency
band radio, simply splice in a wire to each of the two
coming from the radio's speaker output. Connect those
new wires to the input terminals on the Storm Pro. Polarity
is not dependant.
RADIO REBROADCAST ACTIVATION
To activate your radio's rebroadcast through the siren
amplier/speaker, provide power to the the following
terminal:
• Storm Pro 100w
• Input I
• Storm Pro 200w
• Input R
FENIEX // 2018 // INSTRUCTION MANUAL // v2.0
WEB // www.feniexindustries.com
7
TM