User Manual

MOUNTING INSTRUCTIONS
STORM PRO 100 WATT & 200 WATT AMPLIFIER MOUNTING
1) Place the unit against the intended mounting surface.
2) Mark the areas where the mounting holes will be drilled. If the mounting surface is part of the vehicle, make sure no
vital components could be damaged by the drilling process.
3) Pre-drill four 1/16" mounting holes on the mounting surface, making sure no vital components of the surface are
damaged.
4) Make sure to deburr the holes thoroughly.
1.9685”
6.9675”
1.9685”
6.9675”
IMPORTANT
If your Storm Pro Siren has the label/logo pictured,
it is NOT COMPATIBLE with 4200 DataLink.
DO NOT CONNECT IT via RJ45 to the 4200 System.
5) Using customer provided screws, secure the Storm Pro to the mounting surface
FENIEX // 2018 // INSTRUCTION MANUAL // v2.0
WEB // www.feniexindustries.com
8
TM