User Manual

CONFIGURATION INSTRUCTIONS & FEATURE INFORMATION

Only the buttons highlighted in red (above) are siren functions.

SETTING SIREN BUTTONS TO MOMENTARY

1)  press and hold the

desired button you wish to program as momentary.

2) Continue holding the selected button while holding



3) The button is now set as momentary. To reverse the

function, repeat these steps.

Tone Selector

Mic Volume

III

IIII

IIIII

IIIIII

Mic Volume Tone Selector

PARK-KILL

Park-Kill is used to deactivate any activated standard siren

tone. Park-Kill does not deactivate audio recordings. The

Park-Kill wire can be connected to your vehicle's overhead

light, door trigger, or park-signal so that the siren is

disabled when the door is opened or the vehicle is shifted

to park.

RADIO REBROADCAST & MICROPHONE

When either Radio Rebroadcast or the Microphone is

activated, any activated tone, standard siren tone or audio

recording gets deactivated.

MICROPHONE VOLUME

To adjust the microphone volume, locate the mic volume

dial (see diagram) on the side or top of the controller. Use

a small phillips-head screwdriver to adjust the volume.

FENIEX // 2019 // INSTRUCTION MANUAL // v2.2

WEB // www.feniexindustries.com