Instructions

Ecosun A (mm) B (mm)
300 Basic 340 280
600 Basic
935 280
850 Basic
Ecosun X (mm) Y (mm) A (mm) B (mm) Thickness
300 Basic
592 592 340 355
30
600 Basic
1192 592 940 355
850 Basic
1192 800 940 355
1. Use
• Flats, offices, schools, hospitals, shops, industry and agricultural premises, etc.
• The panels can be installed on flammable materials.
2. Wiring
• Power supply: 230V/50Hz
• Protection class I
• IP 44
• The panel is fitted with a thermal fuse.
3. Installing
• The panels are intended for vertical installation. In case of horizontal installation on the ceiling of a room, hang the panel
on a mounting frame, or using chains or cords.
• The minimum distance of the panel front wall and lateral walls from inflammable objects is 10 cm.
Procedure — vertical mounting:
•
Mark the holes according to the table, drill out the holes, insert the dowels and drive the screw in to protrude
approx. 5 mm.
• Always fix the panel on two upper locks, two lower locks serve to a reverse suspension of the panel.
• Connect the lead-in cable to a fixed power distribution in accordance with the colour marking of wires.
• Put the panel on the two upper locks.
Procedure – horizontal mounting
•
Position the mounting frame in the location where the panel is to be placed, using a pen, mark holes according to the
holes on the frame.
• Drill the holes, insert the wall anchors and attach the mounting frame with the screws.
• Connect the lead-in cable to the mains in accordance with the colour of the conductors.
• Slide the panel into the mounting frame.
Fixing Frame