Submittal Sheet

1. SILICONE RUBBER SUPRESSION TYPE: Resistive carbon coated fiberglass core prevents spark energy radiation from interfering with

other electronic systems. Select this wire type for applications where wire lengths are less than 36” and noise is a major concern.

SPECIFICATIONS: V

oltage Rating Agency Rating Temperature Rating Diameter Jacket Material

25 KVDC SAE J2031 200°C (392°F) 7mm (.27”) Silicone Rubber

over Fiberglass Braid

Part Number: 05-129608-0XX

Part Number: 05-129608-2XX

Part Number: 05-129608-6XX

1/4” FEMALE Q.C. WITH

SILICONE RUBBER BOOT

RIGHT ANGLE SPARK PLUG

WITH SILICONE RUBBER BOOT

High Voltage Ignition Wire - 3 Types

Part Number: 05-127613-2XX

Part Number: 05-129865-0XX

Part Number: 05-125948-0XX

Part Number: 05-129887-0XX

Delivering the 15K to 25K volts of spark energy from the ignition control to the electrode is a vital element of an ignition system.

There are 3 material options and multiple terminal configurations available. Shown are the most popular versions offered by Fenwal.

To ensure maximum spark energy, it is recommended that the ignition wires not be longer than 36”. Longer lengths are available and should

be evaluated on the appliance to determine if there is sufficient spark energy to consistently light the burner under all conditions. Once the

wire type and terminal configurations are determined, complete the part number by replacing the last two digits (“XX”)

with the length in inches (“L” dimension). Standard wire lengths are 12, 18, 24, 30, 36, 48, and 60 inches. For other lengths,

please contact Fenwal.

1/4” FEMALE Q.C. -

FULLY INSULATED

BOTH ENDS

1/4” FEMALE Q.C.

BOTH ENDS

RIGHT ANGLE SPARK

PLUG WITH SILICONE

RUBBER BOOT

1/4” FEMALE Q.C.

3. TEFLON INSULATED TYPE:

Low resistance copper conductor transmits maximum spark energy. Select this type for applications that have tight

clearances and sharp bend radii.

SPECIFICATIONS: Voltage Rating Agency Rating Temperature Rating Diameter Jacket Material

25 KVDC UL Type 1911 250°C (482°F) 2mm (.08”) Teflon

TERMINATIONS SAME AS TYPE 1

Series 35-72, 120 VAC Direct Spark Ignition Control Page 7

www.fenwalcontrols.com 1-800-FENWAL-1

. SILICONE RUBBER COPPER CONDUCTOR TYPE: Low resistance copper conductor transmits maximum spark energy. Select this

type when maximum energy or longer wire lengths are required and noise is not a major concern.

SPECIFICATIONS: Voltage Rating Agency Rating Temperature Rating Diameter Jacket Material

25 KVDC UL Type 3257 250

°C (482°F) 7mm (.27”) Silicone Rubber