Operation Manual

HearMe 200BT

TROUBLESHOOTING

The speaker doesn’t play

• Make sure the speaker is charged.

• Make sure the speaker and cell phone are connected. Please refer to your cell phone’s

Bluetooth menu and “Paring Your Device” section.

Cannot pair my cell phone to the speaker

• Make sure the speaker is charged.

• Make sure the speaker and cell phone are in paring mode.

• Make sure the Bluetooth of your cell phone is on; please refer to the cell phone’s users’

manual.

• Make sure the speaker and your cell phone are within controllable range.

If the problem remains, please do as follows

• Re-charge the speaker.

• Turn off your cell phone and take out the battery, and put it back after.

• Turn on Bluetooth of your cell phone and delete all the paring histories.

• Re-pair your cell phone and the speaker.

SPECIFICATION

• RMS : 2W x 2

• Driver : 1.5” x 2

• Impedance : 4Ω

• S/N Ratio : 60dB

• Frequency Response : 80Hz~20kHz

• Function : Wireless Bluetooth A2DP stereo music player, built-in lithium battery with

Mini USB Charging, AUX 3.5 stereoscopic socket signal input.

• Cabinet Material : Rubber + Plastic

• Power Supply : 3.7V 1500mAh (Polymer rechargeable battery)