Operation Manual

Fig. A.
Fig. B.
Abb. C.
Combi grinder
THE NUMBERS IN THE FOLLOWING TEXT COR-
RESPOND WITH THE PICTURES AT PAGE 2.
TECHNICAL DATA
PRODUCT INFORMATION
Fig. A.
1. On/off switch
2. Support (Right)
3. Cover glass
4. Cover glass holder
5. Screw
6. Grinding stone wet
7. Water reservoir
The following pictograms are used in these instructions
for use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
ELECTRICAL SAFETY
Always check if your mains voltage corresponds
with the value on the type plate.
When replacing old cables or plugs
Throw away old cables or plugs immediately as soon as
new ones have replaced these. It is dangerous to put the
plug of a loose cable into the socket outlet.
When using extension cables
Only use an approved extension cable that is suitable for
the machine’s power. The cores must have a diameter of
at least 1.5 mm
2
. When the extension cable is on a reel,
unroll the cable in its entirety.
Voltage | 230 V~
Frequency | 50 Hz
Power input | 370 W
No load speed | 2950/min.
Grinding stone dimensions | 150x20 (12.7) mm
Wet grinding stone dimensions | 200x40 (20) mm
Weight | 12 kg
Lpa (sound pressure) | 76.0 dB(A)
UK
English
A
B) 1-1.5 mm
C) 1-1.5 mm
A
2
6
57 43
1
2 Ferm
Ferm 45
2
5 43
1
EXPLODED VIEW
SPARE PARTS LIST
REF.NR. DESCRIPTION FERM NR.
001 SWITCH 206451
002 SUPPORT 206454
003 COVER GLASS 206401
004 COVER GLASS HOLDER 206132
005 WATER TANK 206442
- GEAR 205450