Operation Manual

ManualsBrandsFerm ManualsCordless DrillCDM4005 FSD-960K1

Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0303-06

Ferm Cordless Drills

FSD-960K I

FSD-1800K I

USER’S MANUAL

Art.nr. 718810

Screwfix art.nr: 13882 – 960

Art.nr. 718870

Screwfix art.nr: 18424 – 1800

UK Subject to change

DocumentRef:

FSD-960K I/13882/PMR2/Issue 1/Mar02

FSD-1800K I/18424/PMR2/Issue 1/Mar02

These instructions are the sole property of Ferm-Omega Tools and may not be reproduced

Summary of content (4 pages)

PAGE 1
UK Subject to change USER’S MANUAL DocumentRef: FSD-960K I/13882/PMR2/Issue 1/Mar02 FSD-1800K I/18424/PMR2/Issue 1/Mar02 Copyright © These instructions are the sole property of Ferm-Omega Tools and may not be reproduced Ferm Cordless Drills FSD-960K I FSD-1800K I Art.nr. 718810 Screwfix art.nr: 13882 – 960 Art.nr. 718870 Screwfix art.nr: 18424 – 1800 Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.
PAGE 2
FERM FSD-960K I AND 1800K I USERS MANUAL TECHNICAL SPECIFICATIONS Voltage (718810) Voltage (718870) Voltage battery charger Frequency battery charger Capacity battery Charging time Number of drilling speeds No load Speed (718810) No load Speed (718870) Weight (incl. battery) Lpa Sound pressure level Vibration | | | | | | | | | | | | — 9.6 V--— 18 V--230 V~ 50 Hz 1.2 Ah (NiCd) 3 - 5h 1 0 - 550/min 0 - 900/min 1.8 kg 75 dB(A) <2.
PAGE 3
Do not abuse cable Never carry tool by the cable or pull it to disconnect it from the power socket. Keep cable away from heat, oil and sharp edges. Do not touch the metal plug pins when connecting or removing the charger unit. AVAILABLE SPARE PARTS FOR FSD-960K1 REF.NR. 2 4 7 - DESCRIPTION KEYLESS CHUCK SWITCH BATTERY CHARGER TSD-3L, 9.6 V ADAPTOR TSD-960L, 3 - 5 hr FERM NR. 406190 406189 406184 406178 406196 Secure work Use clamps or a vice to hold work.
PAGE 4
OPERATION To switch ON/OFF Press the trigger switch 4. To lock trigger switch Put the left-right switch 3 in the central position. Speed control Adjust the drills speed by more or less pressure on the trigger-switch 4. MAINTENCE, CARE AND REPAIR FAULTS Excessive parking Indicates dirt in the motor or worn bushes. Take the drill to your Ferm dealer Direction of rotation Change the direction by pushing switch 3 to left or right, this must be done when the drill is not rotating.