Operation Manual

EN
5
Ferm
COMPRESSOR
The numbers in the following text correspond
with the pitcures at page 1 - 4.
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents
1. Machine details
2. Safety instructions
3. Use
4. Maintenance
1. Machine details
Technical specifications
Voltage 230 V~
Frequency 50 Hz
Capacity 2 hp (1500 W)
Idling speed 2850/min
IP Class IP 20
Tank contents 24litre
Air intake 188 l/min
Max. outlet pressure 8.0 Bar
Weight 23.5 kg
Sound power level 91.0 dB (A)
The value of the noise level may rise from 1 to 10
dB(A) as a function of the environment in which
the compressor will be installed.
Product information
Fig. A
1 Cover
2. Handle
3. Switch
4. Automatic stop
5. Pressure regulator
6. Quick coupler (outlet)
7. Pressure gauge (pressure regulator)
8. Pressure gauge (tank)
9. Drain cock
2. Safety instructions
Explanation of symbols
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Risk of electric shock.
Caution: the compressor could start
automatically in case of a black-out and
subsequent reset
Wear ear protection.
Sound power level
Special safety instructions
Warning! The compressor may only be used •
in suitable rooms (with good ventilation and an
ambient temperature from +5°C to +40°C).
It is recommended to use the compressor with •
a maximum operation of 70% in one hour
under full load, to allow for proper operation of
the product over time.
Check that the tank is fully decompressed •
before connections with the tank are
unscrewed.
It is prohibited to make holes in, or welds to, or •
purposely to distort the compressed air tank.
Do not perform any actions on the compressor •
without first having taken the plug out of the
plug socket.
Do not aim water jets or jets of flammable •
liquids at the compressor.
Do not place flammable objects near the •
compressor.
Switch the pressure regulator to the “0” •
position (OFF = uit) during dwell time.
Never aim the air jet at persons or animals (fig. •
20).
Do not transport the compressor with the tank •
pressurised.
N.B.: some parts of the compressor such as •
the head and the feed-through pipes may