UK Subject to change Document Ref: FBF-1050E Copyright © These instructions are the sole property of Ferm-Omega Safes and may not be reproduced Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0309-24 Ferm Plunge Router FBF-1050E USER’S MANUAL Art.nr.
Fig. B Fig. A Fig. G Fig. F Fig. E Fig. D Fig.
10 REF NR 4 5 6 8 9 17 18 19 23 27 28 31 33 34A 34A 35 36 39 42 43 44 46 47 51 54 55 57 62 72 73 74 78 79 80 81 82 84 86 87 SPARE PARTS LIST FBF-1050E DESCRIPTION SPEED REGULATOR DEPTH KNOB COPPE BUSH BRUSH HOLDER ENCLOSURE SWITCH PULL-BACK BAR SWITCH ACTUATOR STATOR BEARING 60018 ROTOR BEARING 80103 SPRING FOR COLLET COLLET COLLET CHUCK NUT RUBBER CAP FOR HANDLE LOCKING LEVER GEAR BLOCK STOP SPEED REGULATOR RACK BAR HANDLE ROTARY SWITCH PAWL SPRING BRAKE RACK BUTTON FOR BRAKE RACK DUST TUBE SCREW SPING P
OPERATIONAL SAFETY Warning! Be aware this planer can produce fine dust, which can be hazardous to your health. Always use a suitable mask, eye protection, and other personal protection equipment. Use dust extraction during working and cleaning. Concentrate Routine and repetition can lead to mistakes. Remember that a slight lack of concentration can result in serious injuries in a split second. Keep work area clean Cluttered areas and benches invite injuries.
8 Ferm MOUNTING ACCESSORIES Prior to mounting an accessory always unplug the tool. Wait until the machine has come to a complete standstill and the cutter has cooled down before replacing a cutter. MOUNTING AND REMOVING CUTTERS Fig. B Only use cutters with a shaft diameter which corresponds with the size of the collet. Only use cutters which are suited for the maximum speed of the machine. The cutter diameter should not exceed the maximum diameter (see ‘Technical specifications’).
MAINTENCE, CARE AND REPAIR Switch off and unplug the machine before carrying out any cleaning or maintenance work. CLEANING Wear personal protection equipment during cleaning. Do not use water or flammable liquids to clean the planer, clean with a soft brush. FAULTS Should a fault occur, e.g. after wear of a part, please contact your local Ferm dealer. In the back of this manual you find an exploded view showing the parts that can be ordered. LUBRICATION The machine requires no user lubrication.
