Operation Manual

ManualsBrandsFerm ManualsDrillfcd 32401

Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0307-08

Ferm cordless impact drill 32,4 V

FCD-3240-I

USER’S MANUAL

Art.nr. 718900

Screwfix art.nr. 80252

UK Subject to change

Document Ref:

FCD3240-I/80252

These instructions are the sole property of Ferm-Omega Tools and may not be reproduced

Summary of content (4 pages)

PAGE 1
UK Subject to change USER’S MANUAL Document Ref: FCD3240-I/80252 Copyright © These instructions are the sole property of Ferm-Omega Tools and may not be reproduced Ferm cordless impact drill 32,4 V FCD-3240-I Art.nr. 718900 Screwfix art.nr. 80252 Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.
PAGE 2
SAFETY INSTRUCTIONS The following pictograms are used in these instructions for use: CORDLESS IMPACT DRILL FCD-3240-I USERS MANUAL EXPLODED VIEW Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual. Denotes risk of electric shock. TECHNICAL SPECIFICATIONS Voltage Voltage battery charger Frequency battery charger Capacity battery Charging time 2-Speed gearbox, position 1 Position 2 Impact frequency Machine weight (incl.
PAGE 3
ELECTRICAL INFORMATION This product is complete with a pre-wired mains plug, it is double insulated in accordance with EN 60335 – no earth wire is required If the plug needs replacing follow these instructions. Wire correctly The wires in the mains lead are coloured in the following way: BLUE -Neutral BROWN -Live Blue (Neutral) Fuse (5 Amp) Brown (Live) GUARANTEE The guarantee conditions can be found on the separately enclosed guarantee card.
PAGE 4
USING THE COMBI DRILL INSERTING AND REMOVING ACCESSORIES - Remove battery and set direction switch in middle (lock) position. - Put the accessory into the chuck (3) as far as it will go, then tighten firmly anticlockwise by hand only – hold one section of the chuck and turn the other to tighten. - Remove accessories by turning the front part of the chuck clockwise while holding the other. Keep your finger off the trigger-switch during these operations.