UK Subject to change USER’S MANUAL Ferm Trim Saw FCD-18/140 Art.nr. 726900 Screwfix art.nr: 14286 Ferm • P.O. Box 134 • 8280 AC Genemuiden • NL • Web: www.ferm.
8 9 10 11 12 FERM TRIM SAW FC-18/140 USERS MANUAL TECHNICAL SPECIFICATIONS Voltage Voltage battery charger Frequency battery charger Capacity battery Charging time No load Speed Saw blade dimensions Max cutting capacity Weight (incl.1 battery) Lpa (Sound pressure) Lwa (Sound pressure) Vibration value | | | | | | | | | | | | 18 V 230 V~ 50 Hz 1.2 Ah (NiCd) 3 - 5 hours 2750/min 136 mm 38 mm 3.2 kg 85.2 dB(A) 98.
MAINTENANCE, CARE AND REPAIR Remove the battery before carrying out any cleaning, adjusting or changing blades. CLEANING Clean with a soft brush or dry cloth. Do not use flammable liquids to clean the saw they can damage the plastic parts and the finish. A damaged part or guard should be properly repaired by an authorised service centre, unless indicated otherwise in the instruction manual. Have defective switches replaced by an authorised service centre.
BEFORE USING THE SAW Ensure the battery is removed from the saw. - Check that the voltage marked on the charger is suitable for use with your mains supply. The output voltage on the charger is suitable to use with the saw battery. The battery voltage is suitable for the saw. The battery supplied with the saw is not fully charged.
