Operation Manual

ManualsBrandsFerm ManualsSawfes-350

Ferm 115

Savspecifikationer

Overskræringmargins

Fig. 1

Dybdeindstilling 1 mm 2 mm 3 mm 4 mm 6 mm 9 mm 12 mm

Overskæring af 3 mm

5,5 mm 7,5 mm 9 mm 11,5 mm 14,5 mm 16,5 mm

Produktinformation

1. Beskyttelseskappe

Dækplade

3. Justeringsknap savdybde

4. Tænd/sluk knap

5. Håndtag

6. Ventilationsåbninger bag

7. Ventilationsåbninger for

8. Støvudsugning

9. Afstandsangivelse

10. Udløserknap beskyttelseskappe

11. Savklinge

Pakkens indhold

1 Universel og holdbar 18TCT savklinge til træ og plastik

Diamantsavklinge G50 til keramik

1 Savklinge 44HSS fin til træ og plastik

1 Savklinge 60HSS til aluminium og meget fine træ- og plastiksorter

1 Støvudsugningsslange

2 Sekskantnøgle

1 Sikkerhedsinstruktioner

1 Brugsanvisning

1 Garantikort

2. SIKKERHEDSINSTRUKTIONER

Symbolforklaring

CE overensstemmelse med de anvendte europæiske standarder på

sikkerhedsområdet.

Klasse II apparat – dobbeltisoleret – stikket behøver ikke være jordforbundet.

Træ | Alle sorter indtil 12 mm

Metal | Indtil 3 mm i aluminium og bly

Kompositter | MDF, spånplade indtil 12 mm

Plastik | tufnol, perspex, fiberglas, osv.

Mineraler | gulv- og vægfliser, skifer, osv.

FIN

14 Ferm

Plasterboard

• As an exception, the saw may be used to cut plasterboard, but only with suitable dust

extraction. Dust can hinder the movement of the protective cover.

N.B.: Practice sawing wood before trying something more complicated, such as metal or some

types of plastic. More force is required to hold the object to be sawn and you may sometimes

have to use clamps to keep the object in place.

Dust extraction

The Precision Circular Saw is a powerful saw. Alot of dust will be produced when sawing. Since

the blade is fully enclosed, it is necessary to extract the dust.

•

An industrial vacuum cleaner or a household vacuum cleaner can be attached to the saw’s

dust extraction pipe with the aid of a dust extraction kit.

• Before use, make sure the hose fits exactly onto the metal clip.

• Remove the plug from the socket before connecting the hose. Push the hose with the metal

clip onto the dust extraction pipe as far as the lath on the saw. Make sure the protective

cover can still move freely. If necessary, use tape to secure the hose in position.

• Make sure the vacuum cleaner is suitable for use with an electrical machine. In general,

household water and dust vacuum cleaners are suitable.

• It is recommended to use dust extraction when a lot of sawing is to carried out, because

less breaks will then be required to clean the saw and the surroundings.

• It is necessary to extract the dust when sawing dangerous materials, such as hardwood,

MDF and ceramics.

• It is recommended to extract dust if you wish to keep the work area clean.

• It is necessary to extract the dust if the material to be sawn is damp.

4. SERVICE & MAINTENANCE

Remove the plug from the plug socket immediately if the cable becomes damaged.

Also remove the plug during maintenance work.

Maintenance

Machines are designed to function without problems for a long time with a minimum of

maintenance. Cleaning the saw regularly and handling it properly will help extend its lifespan.

Cleaning

For safety reasons, the saw must be cleaned regularly. Abuild-up of dust can affect the

operation of the saw

• Remove the plug from the plug socket.

• Remove the protective cover and clean it thoroughly using a soft brush, such as a paint brush.

• Clean the housing regularly with a soft cloth, preferably each time after use. Make sure that

the ventilation holes are free of dust and dirt. Use a damp soft cloth to remove stubborn dirt.

Do not use any solvents such as petrol, alcohol or ammonia, etc. These types of

substances damage the plastic parts.

FIN